I want to write PCA20006 nRF51822 Beacon Firmware to PCA10004 on nRF6330.
I understand need to modify GPIO.
PCA20006 firmware consist of 3 firmware, SoftDevice, application...
I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Hi,
I found that when I enable char. notification from my android client it triggers BLE_GATTS_EVT_WRITE where p_ble_evt->evt.gatts_evt.params.write.handle matches to my...
Hello.
I'm trying to implement my own RF protocol, with the help of reference manual and examples provided here I was able to come up with this: http://pastebin.com/t2nhkj2B...
Now with the twi_hw_master.c with softdevice, I enable the twi on the start of twi_master_transfer and disable it at the end of twi_master_transfer, but I found the twi can...
Hi All,
I am in need to implement the Central BLE device which can receive the Data from an iOS peripheral device over a particular custom characteristic, Can anyone please...
I'm trying to implement my own radio protocol but the section about addressing in reference manual is very unclear to me. In the "Definition of logical addresses" table it...
Is it possible to protect part of the memory of nRF24le1, in such a way, that it can be used for a serial number?
For my application, it would be beneficial to be able...
Hello,
In the example "nRF51_SDK_8.1.0_b6ed55fvery\examples\ble_central\ble_app_multilink_central\pca10028" when opened in keil there is no flash_softdevice option shown...
dear everyone!
I order a kit- nRF52 preview DK:
www.nordicsemi.com/.../nRF52-Preview-DK
And i also download nRF52_SDK_0.9.1_3639cc9.zip:
developer.nordicsemi.com...
Hello,
I'm writing a driver for an I2C device (it's an external led driver).
My current code executes following steps ...
First I changed I2C configuration :
static...
Hello there.
I'm porting some code that previously worked on S110 stack v7 to stack v8 and I'am experiencing some issues.
After receiving a BLE_EVT_USER_MEM_REQUEST...
Accoding to the "how to generate the INIT file for the DFU",I have configuration Boot loader.hex,but i don't known how to configuration Soft Device.hex.The following is the...
Hello Nordic~
I want to control button debouncing on my nrf51822 based custom board. I went through the button_debounce example found in [Board/nrf6310/debounce_example...
