I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
we also produced self PWM for ADC wave form testing. when we stop transmission, we will get good waveform out, but when we starting transmission, output waveform shape is...
Hi All,
I am trying to build ANT examples for nrf52832 and i am getting below error.
PATH : nRF5_SDK_16.0.0_98a08e2\examples\ant\ant_advanced_burst\pca10040\s212\ses...
Hello,
The datasheet shows example circuit configurations with C3=C4=1pF and L1=3.9nH. But the downloaded reference design shows C3=0.8pF, C4=0.5pF, L1=4.7nH, plus an empty...
I try to incorporate the usb dfu trigger into my application. However when using nrf Connect for Desktop to flash the nrf52840 dongle it can not reopen the dongle.
This...
I'm using SDK 15.3 and Mesh 3.20 on a system, that works fine with LPN and nodes with friend-features. The LPN can initiates (establish) friend connection, request status...
Hi !
In order to consume lowest current，we use the function power_manage() ，let the MCU go into sleep，the SD is S130, V1.0，we enable the GPIOTE，watchdog ，ADC ，app_timer...
Hai, I'm trying to learn the UART using the example code available in nRF5_SDK_15.0.0_a53641a\examples\ble_peripheral\ble_app_uart. I'm using BMD-300 Evaluation Board. I'm...
I am looking at the NRF52832 for some projects and so downloaded the SDK and opened an example project in Segger Embedded Studio (SES). I was shocked to find that the directory...
Hi Devzone!
I'm using UART for sending AT COMMAND and receive the response from lte modem.
I use LM5 which is LTE modem made by m2mnet.
I thought It can be implemented...
I updated to nRF Connect 3.0 today and its seemed to causes issues with any Dongles I connect to my PC. I get the following error:
ERROR Unsupported device with serial number...
Hello,
I want to use the nRF52832 as native transceiver 2.4GHz and I'm looking at examples of the latest SDK.
I'm using Segger Embedded Studio.
I found some examples...
Hi, I'm on final development stage of my custom board. I'm using nRF52840 with nRF5 SDK v15.0.0 and S140 SoftDevice v6.0.0. I need to trace the over-the-air communication...
I'm not using a softdevice, and am doing some time critical measurements when the radio begins transmitting.
This code works very well with nrf51:
__disable_irq(); NRF_RADIO...
Hello
I have a question i cannot figure out. I'm using my phone to send string on my NUS client (NRF52 with SDK15.3.0 and FreeRTOS) and the event BLE_NUS_EVT_RX_DATA is...
