It would be extremely useful to get the HCI Traces (BLE) of my nRF54L15 boards. Documentations: Embedded HCI Tracing For simplicity's sake, here is my setup: - nRF54L15DK...
Hello there,
I'm designing a set of devices composed of a remote and 2 peripheral. The remote's job is to be connected to the 2 peripherals as a central and occasionnaly...
Hello, I’m testing a PID controller for a quadcopter. When I compile the application with the optimize for speed then flash, I notice that the PID response is slower than...
Hi,
I have a couple of questions regarding reading the nRF5340 Temperature Sensor. This is a follow-up to the following DevZone ticket: https://devzone.nordicsemi.com/f...
Hi.
I wonder if you could help me:
I'm using a thingy91x and would like to work with the npm1300. In the case of this hardware, the PMIC npm1300's i2c bus is connected...
RTT log output issue
Hello, I am using SDK v3.0.2 and toolchain v3.0.2. After building and flashing my firmware, no logs are being output to RTT Viewer. What should I do...
We tested the USB performance on the v3.1.0-preview4 and main it looks like it got even worse.
All tests were done on the attached test project: TestProject
main (6855b38ca69d2a70d0a088d9964e606e9981cb14...
Hello I have upgrade software and modem firmware and the program using mqtt protocol don't work any more.
Besides the connection to the broker (many error -106), the program...
Hi, Im using a BMD-300 board with the external crystal installed, I can run zigbee examples fine, even using the external crystal, but when running the Mesh examples I can...
Hi
I have some doubts about NB-IoT and I wanted to clarify them before start deeping developing with nRF91 since this module work with this network.
I know that NB-IoT...
Hi,
I use SDK13.1 FDS example and have some questions about that.
Is there any influence about the lifetime of Flash when i use FDS function to write and delete the records...
Hi,
I am a beginner with nrf9160 DK and followed the instruction in https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/gs_programming.html#gs-programming...
Hello I am using :
GNU/Linux Ubuntu 19.10 on a x86 computer
ST-Link v2 that got flashed into a J-Link
Adafruit nRF52832 Bluefruit Feather
Segger Embedded Studio for...
Hi
I am using nRF52832 DK with SES as IDE, on Ubuntu 16.04 machine. I want to send a custom message, let's say "hello" via BLE to Raspberry Pi. I am using some encryption...
Hi
I am trying "nRF Mesh" apps to provision and configure proxy client and proxy server node (SDK Mesh v2.2.0).
1. Have user manual or help information for "nRF Mesh"...
i want to connect the peripheral using mac address instead of device name , i followed this post https://devzone.nordicsemi.com/f/nordic-q-a/44332/sdk-15-2---scan_addr_filter...
We are using another microcontroller to update the application firmware in an nRF51822 over the UART using the DFU HCI protocol from SDKv11.0.0.
The nRF51822 uses the HCI...
Hi,
I'm trying to edit the C library code which communicates with the nrf52 dongle. I'm using custom gatt & the descriptor CCCD is 0x2902. Since its not able to find the...
Hi,
I'm working on a bootloader that combines both the BLE and UART transport layers. We have custom hardware containing the nRF52832 chip running on SDK 15.3, and we're...
Hello,
I'm using the nrf52840 to try and receive a byte from the nRF24l01+.
After configuring, I trigger TASKS_RXEN, but never receive EVENTS_RXREADY.
Here is the code...
Hi,
I use nordir 52840 as zigbee corrdinator, but one zigbee device send math descriptor request package, I can not get the information in application process. How can I...
To the kind attention of Nordic support team,
I have got a project with this memory configuration
and this
<!DOCTYPE Linker_Placement_File> <Root name="Flash Section...
