I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi,
Is that possible to run the radio_test_example (\nRF51 SDK_v5.2.0.39364\Nordic\nrf51822\Board\nrf6310\radio_test_example) on the nRF51822EK? If yes, what modifications...
Hello!
I have a problem with getting a value (uint8_t) from a characteristics.
I am using 2 nrf51422 boards, where one is a central and the other is a peripheral. I...
I am running a GATT server with multiple proprietary characteristics. I need to perform an action when some of these characteristics are read. They are read-only characteristics...
I'm using an nRF52832 (QFAAB0) on a custom PCB, nRF5 SDK, S132 v2.0.
I'm occasionally encountering spontaneous resets and want to tract down the source. I found the RESETREAS...
On fds_init() I am getting back an "Invalid Data" error code and I'm not sure why.
This is on pca10040, SDK11 and S132 v 2.0
I lifted the example mentioned here -> devzone...
Hi all,
I am using mbed for developing on nRF51-DK. The code has an initialization of a character array as follows:
char tmpbuff[80];
The code compiles and when loaded...
Hello!
I think I might be having some trouble writing to the UICR register, and I've therefore read the UICR register using the nrfjrpog -NRF52 --readuicr command. Im interessted...
Hi, i used this script to change my MAC adress but i checked with MCP , the MAC @ is the same.
More then that, the error code returned is really not logic in fact i got error...
Hello,
I bought a BLE nano and MK20 set with nRF51822 from RedBearLab. Love Nordic complete bluetooth solutions.
In general I am pretty new to Bluetooth development...
Hi there,
I'm currently building a custom app for detecting eddystone/ble peripherals in both iOS and Android, and am using the same hardware to test. On Android, I'm getting...
Hi,
we use nRF8001 in a custom hardware/software project. The device is battery powered and should
use minimum current (in the range of <20µA). When we set the advertising...
Hi all,
I use nRF51822 module and my environment is Eclipse + GCC + SDK 10.0. I refer to the example in path <SDK_PATH>/examples/ble_peripheral/ble_app_template, then make...
Hi,
I've read the BT specs covering addressing several times and still don't really understand how private addresses work in real life.
Lets say my peripheral starts...
Hi all,
I'm want to have an additional user authorisation process in my peripheral device by having a special characterisitic that the central has to write an encoded value...
My six nrf51822 modules died after I erase flash and download "ble bcast mesh" (with sd110 8.0.0)
github.com/.../nRF51-ble-bcast-mesh
At first time, I download firmware...
hello,
my makefile use to work before i add the twi nrf_drv_twi.c file and included the directory
INC_PATHS += -I$(abspath ../../../../../../components/drivers_nrf/ nrf_soc_nosd...
