I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I have created a simple program with 4 FreeRTOS threads(One time, 10 ms, 100 ms, 1000 ms) and it works fine stand alone giving me periodic tasks as expected.
Linker portion...
In a case when we set the scan window = the scan interval does it mean that the scanning will be performed all time? Or all free time?
(But if the scanning process is performed...
Hi all, I'm working on signed bootloader on nRF52832 using sdk11.0.0. I need to update signed bootloader through dfu but I'm facing an issue that is,
I programed softdevice...
Hi all, At present all my custom projects are running on sdk11.0.0 now I need signed bootloader for these I ported experimental signed bootloader from sdk10.0.0 to sdk11.0...
Dear friends,
I am having trouble connecting the Rigado BMD-300 with my Segger J-Link.
I am using the official breakout board from Rigado. I've connected all GND pins...
We are designing an additional "mbed-host board" that makes our nRF52832 based sensor board mbed-compatible ("Aistin Blue-2" board, see predecessor e.g. at www.kionix.com...
I use nrf51822 and soft device s130. I transmit some data using the printf function, and i need to clear the buffer before send data because sometimes i have noise in the...
Hi,
I'm new using XCode and I'm trying to use this guide:
github.com/.../documentation.md
I created a simple Cocoa Application, then I added iOSDFULibrary.framework...
Hello,
I'm experiencing a hardware fault followed by a reset when running the nRF5_SDK_12.1.0_0d23e2a ble_app_hrs_freertos with the following configuration :
PCA10040...
I'm using interrupts on nRF for the first time and have some trouble wrapping my head around / struggling with uncertainty in how to use the interrupts/GPIOTE efficiently...
Hi,
the system that i designed based on nRF51822 have two mode :
the first mode is the normal mode where the nrf should have a high connection interval of 2 to 3 seconds...
Hi,
I need to have a custom service which allows configuration of multiple parameters (perhaps 50 or more - which control registers in external peripherals)
I've looked...
I am reading the device manager code of SDK10.0.0 for nrf51822. I came across the dm_gatts_context_t , dm_gatt_client_context_t . I didn't understand what they store in their...
test1.hex
1.png
2.png
When i used board 0 extension board to program nRF24LE1 QFN24 OTP/Flash. it notification of error "An error occured when programming the infopage...
