I purchased a SIM data from ILIAD and I am trying to connect to network, but the AT command AT+CEREG? : +CEREG: 0,4 instead of 0,5 as I expect.
The lte_lc_connect_async...
In order to reduce power consumption , I configured the RX pin of the serial port with an interrupt , and when the device was asleep , it was woken up by an interrupt , and...
Hi I am using an nRF54L15 with an external watch crystal. I have notice that depending on the manufacturer of the crystal I have to use a different internal load capacitor...
i've noticed that the pc-nrfconnect-ppk is written in typescript (with a lot of .tsx files for visual elements)....
my understanding is that at the lowest-level the power...
I am using the `mcumgr` subsys to enable the DFU (Device Firmware Update) capabilities in a custom device that also features a custom (non mcuboot) bootloader. In order to...
Hi !
I have a peripheral that can connect to other nRF52's or a smart phone such as iPhone or android. Is there an easy way to detect a smart phone?
The best I can think...
Is it possible to see LOG_INF() or LOG_ERR() messages from custom board software when the custom board is connected to a nRF52840DK through connector P20? The custom board...
I am trying to bond a central nordic board to another nordic board acting as a peripheral, however somewhere along the way the bonding fails. I started on the peripheral side...
Hi,
Since there seem to have issues with Android and stuff about long writes, I was wondering if there was a possibility to customize the allowed length in the device name...
I have designed new device based on nrf51822 chip. New PCB with your chip and other elements. I with my team want to sell the standalone device with update possibility by...
Hi all,
i'm doing some beaconing experiments with my NRF51-DK, a RFX2411N-EVB and a HG2408U antenna. I'm using S110 with beaconing demo code, and nRF Connect app to measure...
Hello.
I would like to develop FW for the nRF52832, using Eclipse IDE + ARM GCC + Segger JLink OB.
I've seen on the segger webpage that the nRF52832 is a Cortex M4 processor...
So having first used Kiel, then Eclipse, it was great to finally ditch my clunky windows laptop with its terribly laid out keyboard by making the transition to Segger Embedded...
hi,
i am integrating c++ library with the ble_app_uart example code. using s130 on pca100028 board. in the make file i have made changes by replacing
CFLAGS += -mthumb ...
I want use pwm driver to generate 8 channel pwm wave with nrf52832， My board is PCA10036. I use example “nRF5_SDK_11.0.0_89a8197\examples\peripheral\pwm_driver\pca10040\arm5_no_packs...
Hi,
Can anyone tell me about fstorage module and can I use this storage space to store password? Will it give me any extra level of security? If so how to implement and...
I use a nRF51 dongle for some tests and I want to map the UART interface of UART_example on the pins 15,16,17 and 18 of the Dongle.
I try to juste adapt this lines of code...
I want to know the architecture of transmitter of nRF51822. I have questions as follows.
Does the block diagram of nRF24L01 show it? (nRF51822 has on-air compatibility...
Hi !
I'm running the ble_app_hrs_freertos example from SDK11 on the nRF52 dev. kit.
I would like to toggle some GPIOs to monitor the CPU activity and the FreeRTOS context...
According to this advertising blog: "The advertiser can use a whitelist to limit the interaction to a number of scanner/central device. The whitelist contains an array of...
I'm developing a custom board with nRF52832. We developed a flexible circuit for NFC antenna, and tuned following the indications on this post on the Nordic blog. Actually...
