Custom PCB with nrf5340/nrf7002. Currently was using NCS2.9.0, with WPA2-PSK connection to the wifi.
While trying to enable use of WPA2-Enterprise, I updated to NCS3.0.0...
When using the shell_module project of SDK v3.0.1, I changed uart20 to pins p2.0 and p2.2, and the serial port printed garbled text.
Below is my overlay file:
Strangely...
Beginner here .. steep learning curve for Nordic ... trying a project with I2S. Took half and hour with an ESP32, but many many hours later, no joy with Nordic.
Working...
Hello. I use the function zb_zcl_finish_and_send_packet to send data from ZC to ZED and it works but one problem is that we're using a rather slow poll (20 seconds) to enhance...
Dear Nordic DevZone,
I'm encountering pairing issues with mobile devices and a nRF54 DevKit flashed with HCI over UART firmware. After initial pairing, deleting the bonding...
Hi, i have locked my beacon with the write_lock characteristic and now i want to unlock the beacon with the lock code which is hard coded in my code. but i was unable to do...
Looks like there is an error in the nrf_drv_gpiote_common.h :
#define INTERRUPT_PRIORITY_VALIDATION(pri) STATIC_ASSERT(((pri > 2) && (pri < 4)) || ((pri > 5) && (pri <...
Hi guys,
So as I'm migrating from SDK10 to SDK12 I've noted that the app_pwm module is consuming more power then expected while disabled ~300uA. After initialization, I...
Platform: nRF52-DK using SDK12.1.0 and S132
Summary: Using nrf_log module from SDK along with RTT by setting NRF_LOG_BACKEND_SERIAL_USES_RTT flag causes nrf_log_serial...
For example, in SDK11, the file:
components/softdevice/s130/toolchain/armgcc/armgcc_s130_nrf51822_xxaa.ld
Contains:
RAM (rwx) : ORIGIN = 0x20000000, LENGTH = 0x4000...
Not a question, but a big thank you to Nordic Tech Support (Kristin) who reviewed our nRF24 design several times until we got it right :)
Implementing the recommendations...
Hi,
I am creating the first prototype for my BLE product and for now I used the suggested layout from the datasheet, but I am kind suspicious of that layout it seems very...
I follow the example, as below
nRF5_SDK_12.1.0_0d23e2a\examples\peripheral\flashwrite
but I only get some error, can not get anything, and the ble is unconnected.
Hi there. I'm making a sensor system which is intended to measure an ADC value, and send it using the Heart Rate Sensor template. To make this, I've rebuilt the ble_app_hrs...
Hi
Does the newly released nRF52840 chip have pins on the side, corresponding to the "outer ring" (A8-23, AD2-23, B1-W1, ...) pins on the underside of the chip, like this...
hello i am interfacing i2c sensor mma8452 with nrf51 dk. my function is
void mma_read(uint8_t *x, uint8_t *y, uint8_t *z)
{
uint32_t err_code;
uint8_t rx_buffer...
I have to sample 3 differential channels periodically. Should I calibrate SAADC for each channel individually? Unfortunately, "nRF52832 - Product Specification v1.0" doesn...
Update 2016-Mar-29: I used SDK v10 along with SoftDevice S110 v8 when I run the experiments described in this question.
Update 2016-Mar-30: Upload source code of the modified...
In order to perform dfu to softdevice S132 v3 sdk12 (secure bootloader) from sdk11 softdevice S132 v2 (legacy bootloader).I've change the legacy bootloader as it it says here...
