Hello,
For our emission tests in an anechoic chamber we need to be sure that the BT antenna is up and running. Of course we cannot connect via BT from outside the chamber...
hi support team,
docs says we can program 54l15 external spi flash ,please refer to : https://docs.nordicsemi.com/bundle/nrfutil/page/nrfutil-device/guides/programming_external_memory...
HI,
I am using the nrf_desktop sample in NCS V3.0.2, I want to buil with prj_release_dongle.conf , the setting
but build fail, I check the file Path: it should be F...
Hi:
PLEASE CANCEL THIS TICKET
I'm doing exercise 1 of lesson 1 of the nRF Connect SDK Intermediate course. It says: Get the source code of this course as a third-party...
Hello, We are currently working on the 18031 RED cybersecurity documentation and we have to document all known exploitable vulnerabilities in the hardware and software we...
I want to verify the 4Mbps transmission mode of the nRF54L15 series through ESB samples.But the highest value measured so far is 2.34Mbps, which is much lower than 4Mbps....
On loading the ble_proximity_template Arduino sketch, i get this message "Remove the wire on Pin 6 and reset the board for normal operation." even though there is no connection...
Hello,
Is there any tutorial about how to sign an update for dfu bootloader ?
How can I generate a pem key with dfu_init_template_signing.c Qx and Qy keys in C style ...
Hi
I can't find the soldering profiles for the nRF51822 and nRF52832. Are there any specifications I'm missing or is there a standard profile you suggest?
Thanks for your...
Hello,
Bootloader jump on DFU_BANK_0_REGION_START.
DFU_BANK_0_REGION_START = CODE_REGION_1_START = SD_SIZE_GET(MBR_SIZE) but if i watch value, debugger says it's 0x3008...
Hello,
I am using the nRF52 along with SDK 9.0.2. I have used both the ble_app_uart code and the twi_master_slave code to send data from a sensor over bluetooth to the...
Can anyone explain the difference to me between the two SDKs?
it seems I can use them both for nRF52 development?
they both support the S132 soft device
Which...
i use nrf52 DK as master and configure ads1292 breakout as slave. I have try the loopback example which works properly. I write the sample spi code based on spi_master_with_slave...
ble_app_uart_s110_pca10028
i need function is press button to erase bonding information, then use App to connect and bonding.
How to implement this function? could you...
Hi All,
I'm working with the NRF52 Preview DK, with SDK V 0.92.
I've been looking at and tweaking the SPI_Master tutorial found under /examples/peripheral/spi_master...
I'm exploring the possibility of using an nRF51 for a simple device which must take data samples on a fixed clock and push them to a remote client. The issue I'm investigating...
Even though the documentation suggests that there are 3 RTCs (RTC0, RTC1 and RTC2) and the file nrf52.h has a declaration for the RTC2 peripleral, I am not able to use it...
Hello,
I need a bigger bootloader so if i modify ld file line from
FLASH (rx) : ORIGIN = 0x7A000, LENGTH = 0x4000
to
FLASH (rx) : ORIGIN = 0x00077000, LENGTH = 0x8000...
link text from this post i am generating interrupt using button 3. when i push my button,interrupt generates,LED turn on. but after turning on LED, i want to clear interrupt...
I am using SDK 9 on an nRF51 device with the S110 SoftDevice. I am aware of issues using the the PWM library from SDK 9. I need to use the PWM functionality but would like...
