Hi There,
I am using a nRF52840DK board to experiment with NFC Tag technology.
I started with the "Writable_ndef" example inside the nRFConnect, and it works.
I wrote...
Where can I obtain the security certificates (e.g., client certificate/private key) needed for TLS authentication with nRF Cloud? - Are these generated during device onboarding...
I plan to use my own SIM card (not from Ibasis). Could you clarify how to register the device in nRF Cloud to enable A-GPS services? - Should I link the device’s IMEI or ICCID...
Hello, I am developing nRF5340, the project is pre-production. I am getting a issue with BLE power consumption, when I turned BLE on, the current is about 9uA. with BLE beacon...
Hi ,
1.In the example: In nRF5_SDK_17.1.0_ddde560_usbd_msc_1\components\libraries\block_dev\qspi\nrf_block_dev_qspi.c, I need to set the following 0xB7 bytes. How should...
HI ALL,
nrf54l15dk,v2.8.0,peripheral_uart demo and no changes have been made.
Then add the following content to prj.conf
sysbuild.conf
mcuboot.conf
At this...
Hello!
I'm currently working with the nRF7002 Wi-Fi chip on a custom board. The MCU used is STM32H573ZIT6, and the software is Zephyr 4.0, specifically using the Wi-Fi shell...
On loading the ble_proximity_template Arduino sketch, i get this message "Remove the wire on Pin 6 and reset the board for normal operation." even though there is no connection...
Hello,
Is there any tutorial about how to sign an update for dfu bootloader ?
How can I generate a pem key with dfu_init_template_signing.c Qx and Qy keys in C style ...
Hi
I can't find the soldering profiles for the nRF51822 and nRF52832. Are there any specifications I'm missing or is there a standard profile you suggest?
Thanks for your...
Hello,
Bootloader jump on DFU_BANK_0_REGION_START.
DFU_BANK_0_REGION_START = CODE_REGION_1_START = SD_SIZE_GET(MBR_SIZE) but if i watch value, debugger says it's 0x3008...
Hello,
I am using the nRF52 along with SDK 9.0.2. I have used both the ble_app_uart code and the twi_master_slave code to send data from a sensor over bluetooth to the...
Can anyone explain the difference to me between the two SDKs?
it seems I can use them both for nRF52 development?
they both support the S132 soft device
Which...
i use nrf52 DK as master and configure ads1292 breakout as slave. I have try the loopback example which works properly. I write the sample spi code based on spi_master_with_slave...
ble_app_uart_s110_pca10028
i need function is press button to erase bonding information, then use App to connect and bonding.
How to implement this function? could you...
Hi All,
I'm working with the NRF52 Preview DK, with SDK V 0.92.
I've been looking at and tweaking the SPI_Master tutorial found under /examples/peripheral/spi_master...
I'm exploring the possibility of using an nRF51 for a simple device which must take data samples on a fixed clock and push them to a remote client. The issue I'm investigating...
Even though the documentation suggests that there are 3 RTCs (RTC0, RTC1 and RTC2) and the file nrf52.h has a declaration for the RTC2 peripleral, I am not able to use it...
Hello,
I need a bigger bootloader so if i modify ld file line from
FLASH (rx) : ORIGIN = 0x7A000, LENGTH = 0x4000
to
FLASH (rx) : ORIGIN = 0x00077000, LENGTH = 0x8000...
link text from this post i am generating interrupt using button 3. when i push my button,interrupt generates,LED turn on. but after turning on LED, i want to clear interrupt...
I am using SDK 9 on an nRF51 device with the S110 SoftDevice. I am aware of issues using the the PWM library from SDK 9. I need to use the PWM functionality but would like...
