Hi.
I wonder if you could help me:
I'm using a thingy91x and would like to work with the npm1300. In the case of this hardware, the PMIC npm1300's i2c bus is connected...
RTT log output issue
Hello, I am using SDK v3.0.2 and toolchain v3.0.2. After building and flashing my firmware, no logs are being output to RTT Viewer. What should I do...
We tested the USB performance on the v3.1.0-preview4 and main it looks like it got even worse.
All tests were done on the attached test project: TestProject
main (6855b38ca69d2a70d0a088d9964e606e9981cb14...
Hi all!
I have the NRF54H20 D and somehow the RTT viewer doesn’t work, the board doesn’t work. I am using the most simple zephyr hello world project. It says it is compatible...
Hi there,
We are using for BLE communication a nRF52832 chip with random static address configuration (shown in the UART). Can we be sure that the address of a chip will...
I am building an application for the nRF52840 on Linux just using west . I have been struggling with this issue for some time now. The linker can't find any mbedtls_ccm functions...
Hello, I am experiencing issues with the current measurements taken by the PPK2 when using the nPM2100-EK to power a device. The current drawn from the 2.7V power source ...
Hi, I have a need to connect to a peripheral device from and nRF52 with a Bonded connection.
My device handles bonding when it is a peripheral, but what is needed to enable...
I'm thinking about doing some power consumption experiments with the new BLE5.0 standard.
Has anyone tried to use this power profiler kit (order# nRF6707) on the new Bluetooth5...
Hi,
we were testing Experimental BLE Multiperipheral Application, and it works on Android, but only 2 iOS devices can discover services and characteristics (4 can connect...
Hi:
I am trying to update the HEX file of gateway example using DFU bootloader(serial),i found that nrf51822 don't run to bootloader after reset, but i flash SD and BL using...
Hi,
Because we heavily depend on timeslots we cannot do the main work before the parameters are honored. But we were experiencing some issue's with the standard implementation...
I am using a PCA10040 board and the UART example from
another question .
Now, having tried some different phones I suspect that my Sony E6553 with Android 7.0 has a bug...
My BLE peripheral is an advertising entity using BLE Privacy.
The advertising address(RPA) is changing every in 15 minutes.
But, when a connection is stopped and it resumes...
But when am connected with my phone , it shows like as below
service started
connecting..
gatt=
device.connectGatt(autoconnect=false)
Activity bound to the service...
Hi,
I use ble_app_hrs_s132 project for experiment on bonding function. The version of SDK is v12.2.0. It seems that this example has all the conditions the bonding function...
Because I need to receive the serial interface in the event handler of the serial data communication protocol (custom) send out via bluetooth, a set of protocols to 25 bytes...
hi:
the nrfutil link: github.com/.../mesh_dfu
I've been having a little bit of an issue running the command "python setup.py py2exe" in cmd.exe
the error as follow:...
I'm using the nRF52 + SDK11.0.0 + s132. I have a single physical button on my hardware that can be used to toggle power to the system (though a PMIC). This same button routes...
