I'm trying to use the ADC and internal reference to measure battery voltage on the nrf51422, while S210 is enabled.
From the example nrf51-ble-app-temp-master, I found...
I have Nokia Lumia 630 and it works well with nRF51822-EK but only with SDK nrf51822_v5.1.0.36092 and SoftDevice 6.0.0. Now I decided to try DFU OTA. I programmed bootloader...
Hello,
I found that there is a multiprotocol demo in folder Board\nrf6310\s110\experimental\ble_app_multiactivity_beacon,then I found it can implement concurrent connected...
Dear Sir
We got the problem on DFU upload firmware, it always failed in second DFU . We must unpair the device at iOS setting panel. Before next DFU.
Here is the log data...
Hi All,
My requirement is to read the data from nRF51822 device that is connected to a bluetooth and bluetooth is connected to a system using a .Net application.
I have...
Hi everyone,
I'm using the nRF51822 (pca10000 Dongle + pca10005).
My plan is to send one byte over the radio.
I tried to use the SDK-Example as a template but it's...
Hi Every one,
In my application i want to use two UART's simultaneously, for that i am doing continuous switching of UART communication pins.
I am able to communicate...
Hello,
I am trying to designe my own iot sensor board with nrf52840
For my sensor board i will just add lipo charger IC and MPU6050 (accelerometer)
When i look at designe...
Is there a generic sdk_config.h file for each of the Nordic SDKs?
The ones included for each example seem to be missing useful macros/defines, for example, omission of SEGGER_RTT_CONFIG_DEFAULT_MODE...
Having trouble using a Raspberry Pi 3 as BLE/6LowPAN router in the IoT MQTT example project from nrf5_sdk_15.2.0
I was recommended to use Ubuntu box instead of Raspian(it...
I maked this question because I don't see any example about MQTT-SN client with FreeRTOS. MQTT-SN client libraries in SDK using many timer from app_timer. I don't know whether...
NRF Connect displays only a white screen after some time.
I can connect to my nrf51DK with the ble or the PPK app, but after some seconds (changes between 1-20) only a white...
Hey, I am trying to get a bluetooth mesh up and running with the nrf52832 dev boards (PCA10040) acting as nodes and a Raspberry Pi 3 (with bluez meshctl) as the provisioner...
The implementation in generic_dtt_server.c doesn't properly validate the set message parameter and generates a response despite the message should be ignored.
The Mesh Model...
NRF52 devices and Softdevice 132:
According to SoftDevice specification v5.1 Table 4: Peripheral protection and usage by SoftDevice NRF_FICR data such as ->INFO.PART, DEVICEID...
