I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
I'm trying to implement the Zigbee coordinator sample on the nRF52840 dongle. Although I've received a little bit of guidance on how to adapt the nRF52840DK implementation...
Hello, I am using the Nordic app as Bluetooth low energy scanning but I cannot correctly display Characteristic Aggregate Format in the case of a charac with multiple Presentation...
Hi,
I'm using nRF52832 to connect to my PC via BLE. I'm using NFC pad to establish connection.
Randomly, After short period of connection (about 100ms), I'm receiving...
In modem firmware update sample for nRF9160 gives info about to use non-secure(ns) board. In non-secure(ns) board, it create two environments inside the CPU that can run isolated...
Hello sir,
I am sending the data through ble_custom_value_update function the data goes in indefinite loop .I have also used ( err_code == NRF_ERROR_RESOURCES) function...
Hello everyone,
I'm testing the nRF Connect SDK VS Code extensions and I was wondering how would I open such applications as nrf_desktop or asset_tracker_v2 in VS Code?...
Good day, Today I decided to share one solution that may save your nerves. Quite often there are questions on this forum related to the fact that sometimes radio events are...
Hello, we are using the Android nRF Mesh library. For our application we need features existing in the dev branch. When will these be released and publish to a public maven...
Dear Nordic team,
we would like to test nrf9160dk evaluation board with SIM cards from Sunrise (Switzerland). The Integrated Circuit Card Identifier (ICCID) of these SIM...
Hi,
I have the following issue, maybe I have an error in thinking:
For Access MQTT the Device has a Certificate in a storage slot, lets say 20. If now someone can gain...
I want to measure the Bluetooth report rate. Is there a way to do it?
Or let me know if you have any information on the basic nrf52832ble response speed.
I switched to SDK. In the zigbee bulb example, the initialization function "zigbee_init" in "zb_nrf_platform.c" is started, which sets the address and role of the device....
Can i ask if thingy 52 is able to use Immediate Alert Client Application ( https://infocenter.nordicsemi.com/index.jsp?topic=%2Fsdk_nrf5_v17.1.0%2Fble_sdk_app_ias_c.html ...
Hello, I'm facing this linker error when trying to compile my project. Previously another thread mentioned that it can be fixed by compiling it in C instead of C++. How do...
