I'm having some trouble successfully entering ON,IDLE mode. I have pared-down my application to do the following:
Initializes the app_timer using the scheduler:
...
I want to control GPIO toggle by PPI. Timer1 is in timer mode. CC[0] is 1000, and CC[1] is 8000.
I use compare[0] to toggle gpio18 by PPI. I also want to use compare[1] to...
Hi,
I use two evk board to connected and test the uart serialization sample(ble_s110_serialization), one is ble_app_hrs and one is ble_app_connectivity. But I have one...
I am getting get BLE_EVT_USER_MEM_REQUEST and BLE_GAP_EVT_CONN_PARAM_UPDATE event, when writing to ble device, sample code did not handle these event, and seems no document...
Hello:
Why do I erase SDK5.2 version of flash and read not, in SDK4.2 can. I tested nrf51_sdk_v5_2_0_39364\nrf51822\Board\nrf6310\flashwrite_example is a good example.However...
before i write the flash, it has been erased.so ,its value is all 0xff.
when i write 0x00 to flash address 0x0001,the value read out is not 0x00 but 0x01,and the value in...
A temperature and humidity acquisition device uses NRF52832, watchdog, RTC timer, external touch button interruption, BLE open state, feeding the dog every minute through...
Hi,
I am having 2 nRF52 DK boards and I have to blink the leds of one nRF board with the help of another nRF 52 DK buttons and vice versa .
How to do it?
Hello,
we recently migrated from SDK12.2 to SDK14.2 and noticed a strange behaviour.
After connecting to a bonded device the nrfx_gpiote_irq_handler is no longer called...
Hello,
with SDK15 the definition of the nrf_dfu_flash_callback_t changed from
to
we used the nrf_fstorage_evt_t->result to determine the success of the operation...
Hi,
My application requires a Bluetooth range from 90-100meter. Can you guide me if you have any BLE chipset validated with an RF amplifier using a trace antenna? Can I...
Hi,
we configure a GATT Server with a characteristic that is configuered for write with authorization. If we then try to write one byte to this characteristic from the client...
Hello NORDIC and Tech support members. I am new to NORDIAC devlopment please support me how I start with nordiac please guide step by step and please let me know how I Start...
Hi all,
Where can I find the default program that comes with nRF9160 DK in box?
I'd erased memory and programmed with AT command program but I would want to program as...
Nrf51822QFAAC0 uses softdevic: s110_nrf51822_6.0.0-5.beta, sdk: nrf51_sdk_v5_1_0_36092. Use serial routines. When I annotate the initialization of serial port, and annotate...
Hi,
I have successfully implement the code demonstrated in the two tutorials shown here:
https://devzone.nordicsemi.com/tutorials/b/bluetooth-low-energy/posts/ble-characteristics...
Hi Everyone
As the subject mention，
RTT stops working when power is disturbed by motor.
But other fuction that like ble,spi,uart are work well ，
I must cutoff...
Hi,
I am using NRF52832 with SDK 15.2. In the example, UART/Serial Port Emulation over BLE. The documentation says that this example uses hardware flow control. Therefore...
