I have installed nrf-command-line-tools_10.24.2_amd64 and jLink_Linux_V794e_x86_64 on Ubuntu 22.04. I have also installed nrfconnect-5.0.2-x86_64 for desktop and the Toolchain...
Hello,
We have an NCS v2.2.0 nRF5340 application with MCUboot that requires GPIO control of a few pins extremely early in the startup process. We have a signal "A" pulled...
We are looking for an experienced software developer, for existing board with using nRF Connect SDK. We are using nRF52840-dk.
Please, contact me if you are interested.
Hi all,
Can anyone guide me to the right path where I can get how to interface an E INK DISPLAY(ET014TT1) to the NRF52840 DK board or tobwhere I can get the necessary steps...
I'm having strange behaviour after switching to 3.4.0 on nrf9151. Our existing application was working well on 3.2.0 but showed no life with 3.4.0.
To demonstrate, I built...
Hello,
I am having trouble programming the nrf5340 chip using SWD.
Set up:
Custom hardware with the MDBT53V-1M module from Raytac, nrf5340 chip.
SWD, using J-Link...
The nRF7002 Evaluation Kit and the PCA10143 Development Kit both show multiple vias to the ground tab pin 49 but there is no direct connection from the tab to pins 27, 28...
I want to use P2.00,p2.02,P2.04, P2.0 for UARTE20 on NRF5415DK.
This is to use the uart as an interface for HCI uart with NRF54 as the BLE controlller.
How to enable the...
I am setting up our production facility in India. Brought out our test jig software that flashes the nRF53 modules.
I use nrfutil to program the boards via "nrfutil device...
I am using the Thingy91X kit, and I am trying to make a sample 'hello_main" to work on the nrf5340. My project configuration is as follows:
Sample: zephyr/samples/hello_world...
Dear Experts,
We are bringing up a custom nRF54LS05B module and have built a small production-test firmware on top of the `radio_test` sample. While characterising current...
ncs\v3.4.0\nrf\scripts\generate_psa_key_attributes.py doesn't seem to support X25519 PsaKeyType and allowing it to be used with ECDH algorithm. Is this just functionality...
Hi,
We are exploring using the Firmware Loader to do the OTA for our firmware. As per what I understand from the documentation, the Firmware Loader application will be booted...
I have new Thingy 53. Default Edge Inpulse demo works without any problem. But I have problem with Weather Station demo.
First I tested Zigbee version. After flashing using...
