Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hi,
We are using NRF52832 as our main processor along with an IMU sensor and a vibration motor. We are wondering if using system on mode as power off state (instead of system...
Greetings,
We are using the NCS for the development of a new product with a custom board based on the nRF52840 MCU.
First, we would like to use the Serial DFU feature...
Hi Nordic community,
I'm trying to generate a 1 MHz base clock with one of the peripheral timer, and in the timer ISR does some GPIO toggling.
I followed the nRF5 SDK...
Hello dear Nordic team,
I'm quite experienced in developing under SDK V15 and V17 but absolutely novice for nRF Connect SDK so my question may seem ridiculos. Hope someone...
Hello,
I have an application and I am using a nrf52833, as soon as i flash my application I am getting a hardfault prior to the main call. As in below snap:
I do not...
Hi,
We are using a custom board with nrf52840 and just started using our own generated keys to sign images with NRF SDK v1.9.1.
We ran into issues when trying to swap...
Hi,
I'm moving a project from SPM to TF-M. I have imported a static library and the board (nRF5340DK) restarts automatically every time the following mycli/main.c function...
Hello
I have a nRF52 based device communicating with Smartphones via an encrypted characteristic (SEC_JUST_WORKS) so pairing is triggered and established.
The encrypted...
I want to interface Lis2DH sensor with nRF52832 board. So, I had build and flash the LiS2DH sample code in nRF connect SDK with the required hardware connections. I have also...
Hi,
I got a issue ,that is when i modify the mtu where sample dir is D:\nRF5_SDK_17.1.0_ddde560\examples\ble_central\ble_app_uart_c,it will return a error :
00> <error...
I am evaluating Nordic nRF52840 Development Kit and a test tracking device from Fanstel SE840F-210.
Can I use these for Asset Tracking with Apple Find My network?
I work...
Hi,
I'm using a custom board with an nrf52832. I can also emulate using an nrf52840dk. I have to compile the bootloader because there is no LF crystal on my custom board...
Hello,
I think some corrections/clarifications are needed for the nrfx 2.10.0 drivers.
In the configuration files (for example: nrfx_config_nrf9160.h) I think the definitions...
I’m at the tail end of my project, and I’m turning my focus to the pairing/bonding issue.
The project includes a Central/Client device that connects to several Peripheral...
Hello
I want the example code how to implement the time model i.e get the time, when the particular data is sent from server and received in client side along with the data...
