Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hi,
I followed this guide to use puncover but failed:
https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/zephyr/develop/optimizations/tools.html
I am using...
The Nordic Thingy:91 comes with Bluetooth, and for now most of my deployment will be in areas where I'll be able to connect to it via BLE. I can receive data from my Nordic...
Hi guys,
So here is our application:
we have an external 1GB NAND flash on the board with a nRF52840 SoC. We save sensor inputs to the 1GB flash and when we connect...
I want to either create or open a MCP2515 CAN based application using https://github.com/zephyrproject-rtos/zephyr/tree/main/boards/shields link.
I am new to this platform...
Hello
We are planning to build a product without physical pins and currently evaluating different recovery options. For that we want to use OTA via BLE/SMP in a dedicated...
Hi,
I'm using SDK17.02 HID example on nRF52810.
When slow advertising have timeout, the current is about 6uA. BTW, I closed sleep_mode_enter() function.
But when I stop...
I have found that NRF SDK proposes mbedtls and cifra backends for AES based security. The question is whether is possible to reuse nRF52 HW AES for CCM, GCM, ECB modes supported...
I have nRF52840 module with not enough IOs than what I need and I am looking if possible to hook both: external flash memory and LCD display on the same QSPI peripheral
...
Hi,
As far as I can see, the only difference between these two SoCs are that the 840 has more RAM and flash memory, and supports QSPI (833 does not). Are there any other...
Hi,
We have nRF52833 based solution wherein we have scanner (central role) and multiple sensors (peripheral role) connect to exchange data.
We have added DFU functionality...
Dear Nordic Support Team,
we are planning to use the nRF9160 DK outside of our development department. E. g. we would like to provide the board, along with a certain user...
