Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hello,
I have an iOS application communicating with a custom device having a nordic 8001 chip.
They have established a bonded relation. In nRFgo Studio, in Security...
Hello,
I want to change the 16-bit of 128-bit UUID at runtime. is this possible?
let me explain...
1)the first both central and peripheral set 128-bit UUID like this...
Hi,
Actually i m new on this field.
I m making indoor navigation by using nrf52840 soc.And i m using sdk15.2.In that sdk i used beacon app code for advertising beacon...
Hi.
I use a modified lightswitch server application with Nordic SDK 15.2, Mesh SDK 3.1.0 and Softdevice 6.1.1.
During provisioning I experience a software assert with...
Hi,
I want the bit rate to be 125Kbit or 500kbit. The project uses 1Mbit and 2Mbit. I'm investigating the topic on the Devzone blog. I reviewed the example nrf52840-long...
My work need to use 4 gpio interrupt, but it not work when use freertos on nRF52832 ,sdk version 15.0.0. My code is like below:
err_code = nrf_drv_gpiote_init();
nrf_drv_gpiote_in_config_t...
I created own app button library. It's just return handler into main with number of pin and type of push - short or long. Also I created library for rgb_led (using nrf_pwm...
Hello everybody,
I'm using nRF5280 (Laird BL654) with SoftDeveice S140v6.1.0 and SDK 15.2.0 with a modified version of the blinky peripheral example.
I've changed NRF_SDH_BLE_GATT_MAX_MTU_SIZE...
Hello
Our custom board has two chip configurations for BLE stack. The two chips communicate with each other through UART. Both chips are running zephyr with two chip configuration...
I'm writing an app to that talks to the Thing52 over BLE, and using this as a reference: nordicsemiconductor.github.io/.../firmware_architecture.html For Battery Services...
Hi,
We just recently bought the nRF9160_DK board and compiled and loaded the AT_Client onto the DK. We have followed all the setup instructions for the SIM card for iBasis...
The example code of beacon was used from the SDK - nRF5_SDK_12.1.0_0d23e2a\examples\ble_peripheral\ble_app_beacon\pca10028\s130\arm5_no_packs\ble_app_beacon_pca10028_s130...
Hi experts,
Currently some issues are found in zephyr os, especially the precision of k_timer. Since the nRF51 series uses RTC as the system clock on zephyr os, the round...
I use the scheduler. All my idea is put an event in interrupt handler(timer event, gpiote event and so on) and schedule it to main loop to let app_sched_execute to handle...
Hi All,
We're designing Legacy/Coded Phy scanner based on nrf52811.
The existing softdevice that supports Coded Phy scanner is S140.
Can nrf52811 work with S140 or Nordic...
Hi,
I am struggling with recconecting to Android device. I want the project to work with iOS also.
My nRF de52832 device has got peripheral role in this project. I am...
