I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
HI,
I have two DK10056 52840（one load ble_app_hrs_nfc_pairing ,another load pairing ble_app_hrs_nfc_c）
i using Keil5 SDK17.2 s140 test NFC pairing. I didn't modify the...
The dongle is an excellent piece of hardware. However the features of DFU is rather limited.
I am wondering if I can put two hex files onto the dongle? For example,
1...
We are evaluating 52811/52833 with DF.
1. Is there a beacon example for any of this chips?
2. Is their central example with CTE enabled?
3. Is there example with using...
Hi,
I work with win10 laptop, Toolchain nrf Connect SDK 1.6.1 on a nrf5340dk.
On peripheral_uart sample, I would like to enable uart when a device is connected and I want...
On the nrf connect sdk documentation page there are instructions for configuring a radio co-processor:
http://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/ug_thread_tools...
Hi,
I wanted to replies to Mister Martin Sivertsen from this post https://devzone.nordicsemi.com/f/nordic-q-a/81235/nrf52840-dongle-external-antenna
I accidently locked...
Please ask a question about "PCB specification" in "nRF9160HardwareIntegrationGuidev12.pdf". The board thickness is 1.6 mm. Adding the thickness of the listed copper and FR...
Hello
In our application (NRF52840, softdevice S140 v7.3.0, master device with multiple connections) we are experiencing some strange behaviour related to scheduling of...
Hi All,
I feel like this question/topic has probably been discussed ad nauseum, but I feel like I'm not confident in the conclusion I'm drawing from other posts I've seen...
How to reject/disconnect peer (smartphone) which tried to write huge data to service? For now in my project (based on ble_app_multperipheral project from SDK) if the smartphone...
Hi Nordic Team,
I would like to understand how the radio test works. A better description of the commandos would also be helpful. Is there a more detailed description than...
Good evening,
The following link to "TIMER HAL" lists various enums, including for example " NRF_TIMER_BIT_WIDTH_32 (alias of) = TIMER_BITMODE_BITMODE_32Bit ". I've used...
On Windows 7 64 after update to 3.8 (and 3.9) nRF Connect for Desktop the Bluetooth Low Energy and Power Profiler can't find device nRF52840-Dongle and PPK2.
What to...
Hello,
I was wondering if I could bypass the protocols related to BLE transmission (GATT/ATT) and utilize the RADIO peripheral in a close to constant TX rate without regard...
Hello!
Short question: How can I pass a parameter to a SW Interrupt?
Expanded question: I want the board to wait for an ammount of bytes comming from SPI, once this is...
