SDK_9.0.0
I was trying to implement 2 different UART connection parameters so I decide to use re-initialization.
My initial parameters included APP_UART_FLOW_CONTROL_LOW_POWER...
I'm trying to use the nrf8001 (and arduino) to send MIDI (musical note data) to Mac OSX. According to the Apple developer site the midi profile requires that the characteristic...
I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
I connected my device over BLE with the computer and currently using Bluetooth LE Console from Nordic. The Console is receiving data and that is good, but I do not know how...
I'm running the radio_test example on an nRF52840, but when I try different modulation duty cycles, it seems to work fine for everything less than 94% however 94% itself starts...
Hi Nordic,
I got the following error when I start nrf connect the first time under MacOS. This log is captured by turning on the Debug console:
Uncaught Error: dlopen...
Hello,
I am sampling two analog signals at different sampling rate with burst and oversample enabled.
nRF52832 (Rigado BMD-350)
SDK 15.2
IDE - Segger Embedded Studio...
Hi,
I just got my custom nRF5340 board and started testing it. Here's what I've done:
Connect the board with JLink v11.
Erase the board with Programmer on nRF Connect...
Hi I trying to develop a module in the 52810. I want use te ble_app_beacon and add a DFU buttonless. I was able to add the DFU, but when i was to integrate the buttonless...
Hi, i am Karls of Gabsjin in south Korea.
Sometime ago, i happened to know something controlled by mobile(smart phone)
So I would like to make a avr circuit controlled...
Hi,
I built a peripheral unit which working on NRF52805 with SDK17 (S113/S112).
The unit needs to be "multi peripheral" and advertise 2 different advertising packets simultaneously...
Hello, I have a strange problem and I am not sure how to approach it.
The problem is that the connection sometimes does not get established. This issue appears on Android...
Hi Nordic,
I am been investigating SES these days, may I ask how to export the settings in SES, such as indent settings, text color theme, etc?
I have there laptops need...
Hello,
I'm working with NCS on a nRF5240 based BLE device.
On the BLE side I want to do something like this:
Connectable advertising
Phy: 1M
Interval: 200-500ms...
On my own board ,I just connect VDD and VDDH pin don't connect anything, Now my board can not use ble fuction,if I can confirm it's not the software issue, so is it possible...
Hi,
In short, my problem is that my code works when I execute it inside one event handler, but doesn't work inside another event handler, and I don't understand why it fails...
