Hi,
I am using ADC without external reference and no analog input in order to measure the battery level with a timer (code at the end).
I am also reading several ports...
Hi,
I'm programming the nRF51822 and save some user data into the FLASH by using pstorage_update . It works fine if I set system off mode, and wake it up. I can read back...
Hi,
I have been using nRF51822 with my Android app using Android's Bluetooth Low-Energy APIs.
In order to get more details, I am currently working on integrating the Android...
I'm looking at interfacing a typical Wheatstone bridge sensor to the nRF51822 ADC. This particular sensor only requires a mA or two for excitation and the output fits within...
When use the "nRFBeacons" app to update the info on my beacon the following happens:
Go to update tab.
Select "Connect"
Press "SW2" on beacon and see the LED begin flashing...
I am using s110 and nrf51822. I've set up up a long characteristic of 154 bytes.
Sending between 1 and 154 bytes works as expected.
Sending 155 - 160 bytes gets rejected...
Hi,
I tested the nrf beacon application, it allows only the beacons with company identifier 0x0059 (nordic's id). But i need to modify it to support all the device, how...
Hello, we are facing an issue by connecting several sensors (UART nrf52832) to an Android Application ( Android Nougat 7.0) and we are facing disconnections (this happens...
I used J-Link with RIOT OS before. Worked fine. I wanted to use Zephyr now, so I followed the flashing guide. Since I don't want to write scripts to flash it via OpenOCD,...
I have a custom profile containing five custom characteristics.
The largest characteristic is 256 bytes in size and can be read reliably by an iPhone.
When it is sent...
Hi, there is a code comment "Workaround for PAN_028 rev1.1 anomaly 22 - System" in nRF5_SDK_12.3.0_d7731ad\examples\proprietary_rf\esb_low_power_ptx\pca10028\blank. So, I...
I would like to do I2C BlockRead using nRF52.
devzone.nordicsemi.com/.../i2c-block-read When I looked at it, I found that it was not possible to receive variable length...
Project migrated to SDK 15.3.0 with Softdevice S340 6.1.1
Project is using DFU secure bootloader. The example in "dfu/secure_bootloader/pca10056_ble" was used as the starting...
Dear nordic,
I have some doubts regarding PWM. i want two PWM out both are working different frequency and also i need softdevice. I think PWM can make two ways one is using...
Hello,
I want to change the 16-bit of 128-bit UUID at runtime. is this possible?
let me explain...
1)the first both central and peripheral set 128-bit UUID like this...
Hi,
Actually i m new on this field.
I m making indoor navigation by using nrf52840 soc.And i m using sdk15.2.In that sdk i used beacon app code for advertising beacon...
Hi.
I use a modified lightswitch server application with Nordic SDK 15.2, Mesh SDK 3.1.0 and Softdevice 6.1.1.
During provisioning I experience a software assert with...
Hi,
I want the bit rate to be 125Kbit or 500kbit. The project uses 1Mbit and 2Mbit. I'm investigating the topic on the Devzone blog. I reviewed the example nrf52840-long...
My work need to use 4 gpio interrupt, but it not work when use freertos on nRF52832 ,sdk version 15.0.0. My code is like below:
err_code = nrf_drv_gpiote_init();
nrf_drv_gpiote_in_config_t...
