NCS 3.0.1
nrf52840
nrf21540
I have read several tickets regarding antenna diversity and BLE. It does not seem to be supported for BLE. What about Thread?
I have read...
Affected: nRF Connect SDK v3.4.0; the same code is on main as checked on 2026-11-11 ( subsys/net/lib/nrf_cloud/common/src/nrf_cloud_codec_internal.c , subsys/net/lib/nrf_cloud...
We are currently using an NRF54L15 with TF-M on NCS 3.4.2. We have a custom secure partition, and want it to own a persistent P-256 ECDH private key and derived AES-128 key...
When I connect the two-pin battery and short pin1 and pin2 of P1, I am unable to get the battery voltage at J1 AND WHEN I LEAVE THE PINS UNSHORTED FOR P1, THEN I AM NOT GETTING...
I have connected the correct 47K res for VSET1 but I am not getting 1.8V, instead I am getting 2.3V I am getting the correct output for BUCK2 as 3.3V I have checked the resistor...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Hello,
I am using nrf52 DK, and i have recently encountered a problem.
I am trying to measure the current of a the device during program execution, initially I didn't...
Hello Everyone,
I developed a ZigBee gateway using nrf52840,
SDK: nrf5_sdk_for_thread_and_zigbee_v4.2.0_af27f76
Chip: NRF52840
IDE: Segger embedded studio
now we...
Hello,
I am here, again! I am trying to use the USB of nfr5340dk or my custom board as mass storage with SDCard.
I am sure the SDCard works... in the same project I can...
I working on Script base provisioning in that i using a user input. so I generally try a simple input function to print something the file feed to ipython as input txt file...
Hi Nordic,
Environment
nRF SDK 1.9.1 device - nRF1960 Server The application and delta modem update files are stored on the AWS S3 bucket and served by the AWS cloudFront...
Libuarte seems can't handle too many data or fast enough that comes from nus.
Peripheral and central devices transmit data through Libuarte and nus.
Below is the...
Hi,
I'm trying out the Matter: Light bulb example using an nrf52840 device on NRF52840-DK. So far, I have managed to build the software, flash the device, provision it...
Dear Nordic team,
I am currently using nrf9160dk, I would like to use the digital pins to send digital output to the actuators. Do you have the sample codes for me to refer...
nRF NCS 1.9.x , nrf52840dk
The use-case is I want to set the confirm flag in the local firmware after certain conditions have been met. On every boot up I check the boot_is_img_confirmed...
Hi,
I'm developing Software for the nRF52840. I'm using NCS version 2.2.0 and Zephyr OS build v3.2.99-ncs1.
I try to encode a JSON message that will be send via MQTT....
Hello, when I conducted DFU experiment for NRF5340DK in NCS2.2.0， In ncs2.2\v2.2.0\zephyr\samples\subsys\mgmt\mcumgr\smp_svr project ,configuration selects both overlay-bt...
I test dfu with two board, detail as follow:
First step:: create files needed follow document
Second step:: flash files to board
** EV board: (as receive data via serial...
Hello,
I'm using Linux (Ubuntu) and I would like to add a DFU support to my app.
Tried to follow Add DFU support to your application but it seems to me that some of the...
Hello everyone.
I'm developing on the nRF5340 using nRF Connect SDK. I'm porting an application and I noticed that I need to change the CONFIG_ESB_MAX_PAYLOAD_LENGTH parameter...
