We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
The NRF9160-DK is not recognized for programming Thingy91 by the debug port P19 after Nordic tool and J-Link firmware update from 3.10 to 3.12.
It showed error on VSCode...
Hi,
my board is configured for working @1V8 so I do expect that nRF52832 OB J-Link doesn't work for programming it due to the fact that DK can work @3 / 3.3V only.
I...
Hello, I am using Nordic Power Profiler Kit II for measuring the consumption of a DUT (average 50mA + peaks) but the value returned is completely wrong. I compare the value...
7488 111.881 Slave_0xc844ed5f LE 1M SMP 6 151µs 1 0 True 1 Rcvd Security Request: AuthReq: Bonding
Apparently the SOURCE was the 'slave' but the message was a 'received...
Hei,
I am trying to add mcumgr support for my bootloader. I simply add these configs to mcuboot.conf file:
CONFIG_MCUMGR=y
CONFIG_MCUMGR_SMP_UART=y
CONFIG_THREAD_MONITOR...
Hi,
According to this link: https://learn.microsoft.com/en-us/azure/iot-central/core/concepts-device-templates , IoT Central can automatically assign a device to a device...
I am still trying to figure out what NVIC_SystemReset actually does and why a build and run always gives an error forcing me to press the reset button on the DK to function...
Hi support team,
May i ask how to set 5340 public address from application for example peripheral_lbs?
i tried this:
err = bt_addr_le_from_str ( " 11:22:33:44...
Hi,
We are developing an application with BLE and ANT+, we made a custom board with nRF52832, SDK 17.0.2, s332 7.0.1, and we are using two channels for measuring the battery...
Hi,
i am working with nrf5340, SDK 2.1.1
Previously I was using SDK 1.9.1.
I have upgrade the AppCore with the application firmware built with SDK 2.1.1 but not the...
For Raytac Module # MDBT42Q-P192KL, I have developed an application on the nRF52811 using the S112 Softdevice and serial DFU (& nRF5 SDK v17.1.0 ). Problem statement : Somehow...
This has been asked before i2c message max buffer size but I need a little more info on the the proposed solution "break it up into chunks" from Oyvind.
Using nrfConnect...
I'm currently getting the CTS info out of my iPhone and storing it in my RTC, that talks with my nRF52832 via I2C. All seems to work.
But my Dev Team are now wanting the...
For reasons that are complicated, I need to be able to perform a USB reset on the device I'm developing triggered by firmware events. (I'm working around a problem with host...
hello - i understand there is the nrf connect app but that is not available for linux arm arch. so i have to use python. I am able to see the bus for the board, open and get...
