Hello Nordic team,
What is the image frequency of the nRF54L15 receiver?
We need this information for Bluetooth SIG RF-PHY qualification (RFPHY/RCV/BV-03-C, RFPHY/RCV...
We are developing an application based on the nRF9151 using NCS 3.1.1 and modem firmware mfw_nrf91x1_2.0.3 .
We would like to use Proprietary PSM to control the modem's...
Hello, The nRF9151 hardware design guidelines (power sequence) require VDD_GPIO to be applied at least 6 ms after VDD and ENABLE, after the hardware boot. In our design a...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Dear Team,
I have been running two nRF54LM20-DK as Initiator and Reflector for Bluetooth Channel Sounding.
I adjusted the ranging algorithm RAS_Initiator to print Local...
Hi,
I'm trying to find out how people automate current measurements with the PPK2 beyond doing it by hand in the Power Profiler app.
From the threads here it looks like...
Dear Bluetooth Mesh experts,
The Android app needs to monitor the accessibility of all mesh nodes. One way to implement it would be to add a ping message to the firmware...
Hi,
I´m making my own custom nrf52811 board, but I do have some questions about programming. I want to program it with the nrf52dk using p20.
Now I did read that 3v is...
I installed nRF Connect SDK v2.0.0 and notice that the open Segger Embeded Studio button is not shown.
Also (may be related) opening Segger Embeded Studio from the SDK v1...
Hi,
I followed the instruction on infocenter as bellow,everything goes well ,but the cc.composition_data_get() command,no composition data was received . Any missing steps...
I developed a custom board using nrf52810-qfaa, i edited pca10040e-s112(sdk17.1.0) and changed the advertising led to BSP_BOARD_LED_3, as i have only one led on my board at...
Hi,
I am trying to debug ESB packets with the following setup:
1. PRX (NRF52810)
2..PTX (NRF52810)
3. Sniffer (NRF52832) ( modified PRX so that it returns without...
hi ,
i am developing a zigbee network and i have used the the sample project of zigbee light bulb, switch and coordinator given in nrf5340dk. now i am facing issue with...
Hi,
I am using the nRF52840 DK to connect to an external board via the P20 shield debug out. I was wondering if any indication is given if a board is connected correctly...
The linker script for the example code "Secure bootloader ble" for pca10040 have the FLASH section defined as:
FLASH (rx) : ORIGIN = 0x78000, LENGTH = 0x6000
According...
Hello,
I am using nRF5340 with NCS1.7.0 and nRF RPC lib for intercore communication for our product development. I followed this example ( https://github.com/nrfconnect...
Hello,
I installed NCS 2.0.0 via toolchain manager (Windows).
However, if I:
open a new cmd window
set ZEPHYR_BASE to <ZEPHYR_NCS_2_0_0_PATH>
try to build an example...
Hi Team,
I'm using a nRF52810 board for my project but in that when I upload code using development kit, at that time my device give advertising and what I gave task.
...
Hi,
I am using the nRF9160 on a custom PCB, SDK version 1.6.1 and modem FW 1.3.1
My Application uses MQTT to send messages to a server at regular intervals. In between...