I'm in the early stages of building a Thread + CoAP low-power sensor and using the nRF54L15-Tag as a starting point. Using NCS, the lowest idle current I can get is 13 microamps...
We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Hi. I send 240 byte long messages using ble_nus_c_string_send at the moment.
How come the length field is a uint16_t if the max size is 247 bytes? Is it for future proofing...
I have a custom design buildt on ble_app_uart peripheral example from SDK 12.2.0. I use a timer that I start from case BLE_ADV_FAST in on_adv_evt to send a message to a display...
Hi,
I am using a PWM to control the output of an LED driver and I am implementing a soft_on function when powering ON the driver, so we have a start_PWM function that looks...
Hi, I want to start some projekt with BT840 module and use Keil to programming it. Also, I have Segger jlink programmer but I don't know how start. Can you give me some tips...
Hello,
we are using nRF52840 and have to directly use the CRYS API of the CryptoCell310.
In the documentation of the function CRYS_HASH_Update, the following is written...
When I use the battery to power on, I get NRF_POWER-> RESETREAS = 0x00010000. I check the register manual to see that it is GPIO wake-up. But I didn't configure GPIO wake...
Hello,
I am using Samsung Galaxy Tab A (2016) with android version 5.1.1 build LMY47V and I can not connect to the bluetooth module at all. In the log of the nrf Connect...
For an ADV_IND advertising event without any Scan Requests, what is the maximum amount of time that the radio's receiver will stay on?
Is this parameter configurable?
...
I am trying to configure SPI with BLE using softdevice S130. But SPI is not working properly when I used it with BLE, although it is working fine without BLE
Hello Nordic,
I am having problems getting the PPK to work with my nrf520840-DK application. I am happy to share my code with you, but first a hardware setup-description...
Hi,
Do you have an example in how to upgrade the firmware of the NRF52 family through UART via IAP? I am keen to update the FW of my product without the necessity of using...
Hi,
I'm developing a central application and I would like to be able to get the full device names of the peripherals I connect to. I know how to get the device name from...
Hello,
I'm using the nRF9160 DK for a datalogger with LTE capability, and I'm using the Arduino shield "Mux Shield II" which can be found here: mayhewlabs.com/.../mux-shield...
Hi
I am using pca 10040 and nRF5_SDK_15.2.0_9412b96
Is there a way I can modify the LOG feature so it comes out on a UART instead of the USB COM port. This is probably...
