I'm in the early stages of building a Thread + CoAP low-power sensor and using the nRF54L15-Tag as a starting point. Using NCS, the lowest idle current I can get is 13 microamps...
We are currently evaluating the nrf9151 via the thingy91X
for our application we need the device to function in areas with no cell coverage and not drain the battery....
Hi
SDK: ncs-v3.4.2
I wanted to compile the lesson as a starting point for a product in non-secure mode with TFM.
I don't have the nrf5340dk but one with the same chip...
We will like to use the Nordic nRF9151 to verify our CP-EDT feature. For that we need an AT command to trigger MO ping but we have not been able to find such command in your...
Hardware: nRF21540 DK
SDK Version: NCS 3.4.0
Problem Description:
Modified the observer sample to scan for a specific device, using nRF21540 DK as the scanner with FEM...
Hello,
Recently we're planning to start our nRF-9151 custom board production.
I've designed my own PC program to confirm all the connectors out application used are doing...
I'm not sure if I can share the files here, but you can email me at kc6ete at gmail if you want a copy It's a four color print designed for the Snapmaker U1 though it can...
Hey, I am trying to get a bluetooth mesh up and running with the nrf52832 dev boards (PCA10040) acting as nodes and a Raspberry Pi 3 (with bluez meshctl) as the provisioner...
The implementation in generic_dtt_server.c doesn't properly validate the set message parameter and generates a response despite the message should be ignored.
The Mesh Model...
NRF52 devices and Softdevice 132:
According to SoftDevice specification v5.1 Table 4: Peripheral protection and usage by SoftDevice NRF_FICR data such as ->INFO.PART, DEVICEID...
Hello guys,
everything worked fine for me (NRFConnect, Apps, CLI, Building with Segger Studio, Prgramming via NRFConnect Programmer, everything on Win10) but then I was...
Hi,
I am using nRF52832 DK for testing beaconing and TWIM and TWIS. I am using SDK 14.2.0 S132 v5.1.0.
But, the final product would be using nRF52810. So, will the code...
I'm working on a project with nrf52840 and i'm trying to send and receive ipv6 packet throw thread protocol so i tried to use to send with otIp6Send and receive with otIp6SetReceiveCallback...
Hi,
Is there a detailed analogue circuit model available for the GPIO pins on nRF52. Most of all, I am interested in the circuit model (or SPICE model) for the IO pin when...
Hi, I am currently working on calculating a Li-ion battery;s remaining capacity. As far as I know, I should read the raw value via SAADC. then convert the value back to voltage...
Hello, everybody
I got a problem that i add device name and advertising my specific data according to Beacon example in SDK 15.2.0, but the data order is not what i expected...
Hi，
DMX512 protocol is USITT（United States Institute for Theater Technology）Prescribed agreement
I want to follow this agreement to design
============ DMX512 protocol...
Working on nRF51822 QFAB custom board.
I loaded nRF51822 Beacon v1.1.1 Precompiled hex file in custom board.
Keil 5 Uvision iDE
Windows 7
But I loaded examples programs...
Hello,
I'm developing a solution based on nrf52832 that must be maintained for many years. I want to update my application but also softdevice.
I managed to implement...
Hi,
We are using nRF52832,want to configure non standard baud rate 5787 as per our client request,
Is there formula to calculate the error and reg values please advice...
