Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
Power management of nRF7000 using nPM1300 0

Hi, We're working on a cellular design using the nRF9151 with an nRF7000 for location finding. We have a working prototype on the Thingy91x and are currently focusing on...
5 views

0 replies

Started 1 hour ago
by andychess
Not Answered
Matter device become offline in multi-fabric when multiple devices are provisioned 0

Hello DevZone, One customer meets an issue. Needs an expert about Matter. There are 5 Matter over Thread window covering devices which are already commissioned in 2 fabrics...
10 views

0 replies

Started 3 hours ago
by Jayant Tang
Not Answered
nPM1300 I2C SCL Tf & Tlow timing 0

Hi According I2C standard, there is a requirement regarding falling speed of SCL/SDA which is > 20*1.8/5.5=6.54ns, and our measurement result of Tf on SCL is 5.732ns. ...
13 views

0 replies

Started 9 hours ago
by Poki Huang
Not Answered
Custom board with nRF5340: after reset firmware does not run and SWD is locked 0

I'm using ncs 3.2.1 with a custom board (Holyiot-20046-v1.0). I used the "Create a new board" function in nRF Connect VSCODE to create the board file. I copied the Zephyr...
16 views

0 replies

Started 10 hours ago
by denis
Not Answered
Xiao Seeed nRF52840 Sense - problem reading microphone data 0

Hi all, I am having difficulties reading microphone data using built-in microphone at Xiao Seeed nRF52840 Sense. I have configured the overlay file as suggested here . Then...
23 views

0 replies

Started 13 hours ago
by jaroslav.psenicka

Recent in the DevZone Blog

MultiLink with Peripherals & Centrals in the nRF5 SDK v13

JustinLee

##Introducing concurrent MultiLinks I’d like to inform that it is possible to configure concurrent-multiple connections with several Centrals and Peripherals. This behavior can be possible to use examples…
- 22 Aug 2017
Nordic Thingy:52 Raspberry Pi Python Interface

gamnes

Thingy:52 Python Raspberry Pi Interface This blog is a follow up to both the Nordic Thingy:52 node.js/Raspberry Pi demos and the https://devzone.nordicsemi.com/blogs/1160/walkthrough-of-nordic-thingy52…
- 18 Aug 2017
Driving WS2812B LEDs using I2S on the Nordic nRF52832

Mahesh Venkitachalam

In this article, I use the I2S peripheral of the Nordic nRF52832 to generate the waveforms required to drive the popular WS2812B RGB LEDs. http://electronut.in/nrf52-i2s-ws2812/
- 18 Aug 2017
Walkthrough of Nordic Thingy:52 Node.js Raspberry Pi demos

gamnes

Thingy:52 Node.js Raspberry Pi Interface This blog post is a follow up to the Nordic Thingy:52 node.js/Raspberry Pi demos blog post, and will described how you can run and what to expect from each of…
- 17 Aug 2017
ble_app_hrs_freertos running in Atollic TrueSTUDIO

jmag999

This post describes how you can get the ble_app_hrs_freertos example project running in Atollic TrueSTUDIO 8.0 on a pca10040 board. This is a managed make build, it does not rely on the makefile provided…
- 14 Aug 2017
OLED display support for nRF52832 (SSD1306, Adafruit GFX)

Mahesh Venkitachalam

Just a quick post to say that we have ported the Adafruit GFX and SSD1306 libraries to nRF52832. Currently only I2C is supported. The code can be found here: https://github.com/electronut/ElectronutLabs…
- 11 Aug 2017