Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered

Clarification on SWDCLK requirements 0

According to the nRF51 series reference manual. 10.1.2 Debug interface mode Debug interface mode is initiated by clocking one clock cycle on SWDCLK with SWDIO=1. Due...

1511 views

0 replies

Started over 10 years ago
by Charles Manning
Not Answered
How to size PSTORAGE_CMD_QUEUE_SIZE 0

Hi, I was looking at the .map for my project and I noticed that pstorage.c was taking up a bunch of RAM (~600 bytes), which I thought was a lot, so I went into pstrorage_platform...
- ble 110 nrf51822 pstorage
810 views

0 replies

Started over 10 years ago
by Akbar Dhanaliwala
Not Answered
nRF51422 BLE examples missing 0

The document nRF51422_Evaluation_Kit_User_Guide_v2.0.pdf says: Locate the Heart Rate demo project found in the folder ARM\Device\Nordic\nrf51422\Board\pca10003\s310\ble_app_hrs...
- nrf51422 ble
773 views

0 replies

Started over 10 years ago
by rapjr
Not Answered
How to check Beacon battery condition? 0

Using the nRF Beacons app, but cannot see the battery condition of each beacon. Is this already implemented - if so how to turn on? If not how is it implemented?
- bluetooth low energy
- nrf51822
771 views

0 replies

Started over 10 years ago
by nmdjapan
Not Answered

Is Beacon battery condition advertised? 0

Using the nRF Beacons app, but cannot see the battery condition of each beacon. Is this already implemented - if so how to turn on? If not how is it implemented?

676 views

0 replies

Started over 10 years ago
by nmdjapan

Recent in Nordic blog

Introducing the Cellular Monitor

Michal

The development of cellular IoT often requires insight into the network traffic and parameters provided by the network operator, information that isn’t always available through the application itself or…
- 20 Jun 2023
Solving real-world challenges: The new features of Bluetooth Mesh 1.1

Pawel Kanafek

Bluetooth Mesh is gaining a stronger position to become the go-to technology for professional lighting and other building-related control networks, with a noticeable increase in focus on commercial spaces…
- 15 Jun 2023
DECT NR+: A technical dive into non-cellular 5G

Heidi-Irene Harvey Sollie

The world's first non-cellular 5G technology has been getting some attention recently, ever since it was standardized by ETSI in 2020 and later adopted as a 5G standard in 2022. DECT NR+, or DECT-2020…
- 25 May 2023

Latest guides

Peripherals And RF Test: Writing device drivers for UART peripherals

Halvor Bjorstad

This post aims to cover some of the specifics of developing device drivers for UART peripherals for Zephyr.
- 20 Jul 2021
Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021