Nordic DevZone

Recent and unreplied - Help your fellow developer and earn points!

Not Answered
How to send and recive data to mutiple peripheral devices 0

Dear The BLE Multi-link example (ble_app_multilink_central and ble_app_multilink_peripheral) shows how one central device can connect to multiple peripheral devices. ...
- multiple peripheral
632 views

0 replies

Started over 8 years ago
by sjkim
Not Answered
Eddystone URL parser is broken in MCP 0

In the MCP app, if I have the following service data for an Eddystone beacon: 0x10, // Eddystone-URL type 0x00, // TX power in dBm. This is a signed integer so 0xEE ...
764 views

0 replies

Started over 8 years ago
by Tim
Not Answered
Cannot connect to BLE devices requiring random LE address type with Android nRF app 0

I have the nRF Control Panel Android application. It works fine with several BLE devices, but specifically for the Fitbit Flex, it fails to connect. I know Fitbit wristbandes...
2898 views

0 replies

Started over 8 years ago
by Axelle
Not Answered

Communication between Gazell and non-gazell devices 0

Hi, The situation: I was able to successfully receive known packets from a device running gzp_device_dynamic_pairing, from, the host running the gzp_host_dynamic_pairing...

742 views

0 replies

Started over 8 years ago
by nordicdev
Not Answered
softdevicee s130 rssi problem 0

Hi everyone nrf51822,softdevice s130 2.0.0 now i used softdevice s130 establish two connection as a central with two s110 peripheral device,at the same time i establish...
- nrf51822
- bluetooth low energy s130 rssi
554 views

0 replies

Started over 8 years ago
by xieyang

Recent in Nordic blog

Bluz, a new internet connected dev kit based on the nrf51822, has launched

eric ely

Bluetooth LE is a fantastic technology for battery powered, Internet of Things devices. However, most dev kits require tethering to a smartphone, limiting the range and usefulness to only when the user…
- 19 Feb 2016
Serial DFU Procedure and Tips

Eugene Yu

Serial DFU Procedure and Tips Hi, Some of you may need to use Serial DFU to transfer firmware from external MCU or PC. So I am posting this blog to might help saving your time to debug and development…
- 18 Feb 2016
Changes in the Infocenter

Ruth Fuchss

If you have bookmarked pages in our Infocenter, you might have noticed that many of those links don't work anymore. This is due to major changes to the backend of the Infocenter structure that will make…
- 17 Feb 2016

Latest guides

Peripherals And RF Test: Writing device drivers for UART peripherals

Halvor Bjorstad

This post aims to cover some of the specifics of developing device drivers for UART peripherals for Zephyr.
- 20 Jul 2021
Software: Testing concurrent multi-protocol support of Zigbee & BLE over single USB connection to external CPU

Mark Q

Purpose The purpose of this blog is to showcase how a single USB bus can be used as the physical transport for multiple protocols when an external CPU is the controller. Specifications as tested Boards…
- 13 Jul 2021
Peripherals And RF Test: Working around missing shield labels (on the nRF9160 DK)

Embla Flatlandsmo

Table of Contents Objectives What are device tree overlays, and how do they relate to shields? Why are Arduino nodes not recognized in the nRF9160 DK? The workaround: Using the shield as a board ove…
- 25 Jun 2021
Peripherals And RF Test: LVGL on a TFT LCD Display with the nRF9160 DK

Embla Flatlandsmo

Table of Contents Hardware Components Wiring Software Prerequisites Steps Incorporating this into other projects Further reading Attached files This blog post demonstrates how to get a LVGL sample…
- 25 Jun 2021
Software: Using the NCS / West to program the Radio_Test example into the nRF5340-DK for agency testing.

Jay Tyzzer

Background: There is a need to be able to put a Nordic Semiconductors S0C /transceivers into modes where the physical layer and RF characteristics may be ascertained. The radio test example is used to…
- 18 Jun 2021
Software: Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice - Part 2 Central role

Hung Bui

This is part 2 of the series Building a Bluetooth application on nRF Connect SDK - Contrasting to SoftDevice based Bluetooth applications You can find the other parts here: Part 1 - Peripheral Role. Part…
- 5 May 2021