Combined WiFi and BLE Radio testing for nRF7002DK

Hello,

We are in certification stages for our custom product based on the nRF7002DK. Our application requires BLE and WiFi to be operational simultaneously. Consequently, the certification process also requires capability to test both WiFi and BLE radio simultaneously.

We have been referring to the existing separate nordic samples for BLE and WiFi radio tests but unable to find a sample/ guide which can make both work as part of the same application.

Is there any way to achieve this where the radio tests can be performed simultaneously for WiFi and BLE through a common build?

Thanks,

Ashish 

Parents
  • Hello Håkon,

    In continuation to the certification tests that we need to support, the next test has the following high-level requirements:

    1. DUT connects to a WiFi network
    2. Test equipment/ WiFi sniffer will scan for the WiFi advertised by the DUT and connect to it
    3. Configuration will be performed on the DUT related to IPV4/IPV6 interfaces i.e., different combinations of IPV4 and IPV6 enabling/ disabling

    Is there a sample to support tests as per the above requirement? This is the test specification for your reference RFC 4213:2005, 2460:1998, 8200:2017

Reply
  • Hello Håkon,

    In continuation to the certification tests that we need to support, the next test has the following high-level requirements:

    1. DUT connects to a WiFi network
    2. Test equipment/ WiFi sniffer will scan for the WiFi advertised by the DUT and connect to it
    3. Configuration will be performed on the DUT related to IPV4/IPV6 interfaces i.e., different combinations of IPV4 and IPV6 enabling/ disabling

    Is there a sample to support tests as per the above requirement? This is the test specification for your reference RFC 4213:2005, 2460:1998, 8200:2017

Children
Related