Broadcast sink setup using nrf5340, facing build errors

[Niketakumari Dubey]

Attached error log snippet for the reference. 

[Priyanka]

Hi,

Is this the nRF5340 Audio DK or is it you custom audio board?

Do you get issues with a later SDK version, say, v2.7.0 or 2.9.0?

Regards,

Priyanka

[Niketakumari Dubey]

SDK version v2.5.0

[Niketakumari Dubey]

Can you please provide steps with the v2.9.0?

[Priyanka]

Hi,

I was able to build successfully for v2.9.0 as well.

Could you first delete any existing build folders first?

Please check python --version,

nrfjprog --version and

cmake --version, just to make sure that they are up to date.

Then,

1. Please try west update

    Followed by west zephyr-export

2. After that, please set CONFIG_TRANSPORT_BIS=y in the prj.conf file.

3. And then finally:

   west build -b nrf5340_audio_dk_nrf5340_cpuapp --pristine -- -DCONFIG_AUDIO_DEV=2

You should be able to build successfully now.

-Priyanka

[Niketakumari Dubey]

when I executing west update command using terminal, facing it is asking to select any applications from the multiple options. means west command is not working.

[Priyanka]

Could you attach what you see when you run west update?

-Priyanka

[Niketakumari Dubey]

It is asking to select app after west update command

[Priyanka]

HI,

Could you open the command prompt via Toolchain Manager as follows:

And then try the west update, followed by the west zephyr-export?

-Priyanka

[Niketakumari Dubey]

This steps worked for me. but still after building the code not able to scan Nordik advertisement. after building board is in red colour. can you please provide flash step for this sdk version v2.9.0.

[Priyanka]

Hi,

As mentioned before, follow these steps to build the sample:

Priyanka said:

2. After that, please set CONFIG_TRANSPORT_BIS=y in the prj.conf file.

3. And then finally:

   west build -b nrf5340_audio_dk_nrf5340_cpuapp --pristine -- -DCONFIG_AUDIO_DEV=2

After this, then west flash should flash your sample onto the board.

The board should turn green upon flashing.

-Priyanka

[Niketakumari Dubey]

while doing 3rd step facing below error:

[Priyanka]

Please make sure that you have the following files in the nrf5340_audio folder:

Also, please share your CMakeLists.txt as the error mentions this file is not present.

-Priyanka