Attached error log snippet for the reference.
Attached error log snippet for the reference.
Hi,
Is this the nRF5340 Audio DK or is it you custom audio board?
Do you get issues with a later SDK version, say, v2.7.0 or 2.9.0?
Regards,
Priyanka
SDK version v2.5.0
Hi,
As mentioned before, follow these steps to build the sample:
Priyanka said:2. After that, please set CONFIG_TRANSPORT_BIS=y in the prj.conf file.
3. And then finally:
west build -b nrf5340_audio_dk_nrf5340_cpuapp --pristine -- -DCONFIG_AUDIO_DEV=2
After this, then west flash should flash your sample onto the board.
The board should turn green upon flashing.
-Priyanka
while doing 3rd step facing below error:
Please make sure that you have the following files in the nrf5340_audio folder:
Also, please share your CMakeLists.txt as the error mentions this file is not present.
-Priyanka
Below is the files in the nrf5340_audio folder:
cmakelists.txt file:
#
# Copyright (c) 2022 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#
cmake_minimum_required(VERSION 3.20.0)
# Flag which defines whether application is compiled as gateway/dongle or headset
add_compile_definitions(HEADSET=1)
add_compile_definitions(GATEWAY=2)
find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
project(NRF5340_AUDIO)
string(TIMESTAMP NRF5340_AUDIO_CORE_APP_COMP_DATE "%a %b %d %H:%M:%S %Y")
# Generate fw_info_app.c
configure_file("${CMAKE_CURRENT_SOURCE_DIR}/src/utils/fw_info_app.c.in"
"${CMAKE_BINARY_DIR}/fw_info_app.c"
@ONLY)
# Target sources below are specific to the nRF5340 Audio DK HW
target_sources(app PRIVATE
${CMAKE_BINARY_DIR}/fw_info_app.c
)
if (CONFIG_BT_BAP_BROADCAST_SINK)
add_subdirectory(broadcast_sink)
endif()
if (CONFIG_BT_BAP_BROADCAST_SOURCE)
add_subdirectory(broadcast_source)
endif()
if (CONFIG_BT_BAP_UNICAST_CLIENT)
add_subdirectory(unicast_client)
endif()
if (CONFIG_BT_BAP_UNICAST_SERVER)
add_subdirectory(unicast_server)
endif()
# Include application events and configuration headers
zephyr_library_include_directories(
include
src/audio
src/bluetooth
src/drivers
src/modules
src/utils
src/utils/macros
)
zephyr_library_include_directories(app PRIVATE
${ZEPHYR_NRF_MODULE_DIR}/boards/arm/nrf5340_audio_dk_nrf5340)
# Application sources
add_subdirectory(src/audio)
add_subdirectory(src/bluetooth)
add_subdirectory(src/drivers)
add_subdirectory(src/modules)
add_subdirectory(src/utils)
## Cirrus Logic
if (CONFIG_HW_CODEC_CIRRUS_LOGIC)
if (ZEPHYR_CIRRUS_LOGIC_MODULE_DIR)
add_subdirectory(${ZEPHYR_CIRRUS_LOGIC_MODULE_DIR} cirrus_logic_bin_dir)
else()
message(FATAL_ERROR "Cirrus Logic/sdk-mcu-drivers repository not found\n")
endif()
endif()
cmakelists.txt file:
#
# Copyright (c) 2022 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: LicenseRef-Nordic-5-Clause
#
cmake_minimum_required(VERSION 3.20.0)
# Flag which defines whether application is compiled as gateway/dongle or headset
add_compile_definitions(HEADSET=1)
add_compile_definitions(GATEWAY=2)
find_package(Zephyr REQUIRED HINTS $ENV{ZEPHYR_BASE})
project(NRF5340_AUDIO)
string(TIMESTAMP NRF5340_AUDIO_CORE_APP_COMP_DATE "%a %b %d %H:%M:%S %Y")
# Generate fw_info_app.c
configure_file("${CMAKE_CURRENT_SOURCE_DIR}/src/utils/fw_info_app.c.in"
"${CMAKE_BINARY_DIR}/fw_info_app.c"
@ONLY)
# Target sources below are specific to the nRF5340 Audio DK HW
target_sources(app PRIVATE
${CMAKE_BINARY_DIR}/fw_info_app.c
)
if (CONFIG_BT_BAP_BROADCAST_SINK)
add_subdirectory(broadcast_sink)
endif()
if (CONFIG_BT_BAP_BROADCAST_SOURCE)
add_subdirectory(broadcast_source)
endif()
if (CONFIG_BT_BAP_UNICAST_CLIENT)
add_subdirectory(unicast_client)
endif()
if (CONFIG_BT_BAP_UNICAST_SERVER)
add_subdirectory(unicast_server)
endif()
# Include application events and configuration headers
zephyr_library_include_directories(
include
src/audio
src/bluetooth
src/drivers
src/modules
src/utils
src/utils/macros
)
zephyr_library_include_directories(app PRIVATE
${ZEPHYR_NRF_MODULE_DIR}/boards/arm/nrf5340_audio_dk_nrf5340)
# Application sources
add_subdirectory(src/audio)
add_subdirectory(src/bluetooth)
add_subdirectory(src/drivers)
add_subdirectory(src/modules)
add_subdirectory(src/utils)
## Cirrus Logic
if (CONFIG_HW_CODEC_CIRRUS_LOGIC)
if (ZEPHYR_CIRRUS_LOGIC_MODULE_DIR)
add_subdirectory(${ZEPHYR_CIRRUS_LOGIC_MODULE_DIR} cirrus_logic_bin_dir)
else()
message(FATAL_ERROR "Cirrus Logic/sdk-mcu-drivers repository not found\n")
endif()
endif()
Hi,
I just noticed one thing.
When you build, first navigate to the nrf5340_audio folder, i.e.
right now you are doing the 3rd step of west build from the c:/ncs/v2.9.0 location, but you need to do the 3rd step from this location:
c:/ncs/v2.9.0/nrf/applications/nrf5340_audio
Please try from this location and you will be able to build.
-Priyanka
Facing below build error while running on the provided path:
Please open command prompt via Toolchain manager as mentioned before.
Then select the path by:
cd C:/ncs/..../nrf5340_audio
Then in the updated path, try the west build.
Also, please attach the entire build log, including what instruction you have given.
-Priyanka
I am running west build by opening command prompt via toolchain manager:
(v2.9.0) C:\ncs\v2.9.0\nrf\applications\nrf5340_audio> west build -b nrf5340_audio_dk_nrf5340_cpuapp --pristine -- -DCONFIG_AUDIO_DEV=2
-- west build: making build dir C:\ncs\v2.9.0\nrf\applications\nrf5340_audio\build pristine
-- west build: generating a build system
Loading Zephyr module(s) (Zephyr base): sysbuild_default
-- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter
-- Cache files will be written to: C:/ncs/v2.9.0/zephyr/.cache
-- Found west (found suitable version "1.2.0", minimum required is "0.14.0")
CMake Warning at C:/ncs/v2.9.0/zephyr/cmake/modules/boards.cmake:110 (message):
Deprecated BOARD=nrf5340_audio_dk_nrf5340_cpuapp specified, board
automatically changed to: nrf5340_audio_dk/nrf5340/cpuapp.
Call Stack (most recent call first):
cmake/modules/sysbuild_default.cmake:15 (include)
C:/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:75 (include)
C:/ncs/v2.9.0/zephyr/share/zephyr-package/cmake/ZephyrConfig.cmake:92 (include_boilerplate)
C:/ncs/v2.9.0/zephyr/share/sysbuild-package/cmake/SysbuildConfig.cmake:8 (include)
template/CMakeLists.txt:10 (find_package)
-- Board: nrf5340_audio_dk, qualifiers: nrf5340/cpuapp
Parsing C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/Kconfig.sysbuild
Loaded configuration 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/_sysbuild/empty.conf'
Merged configuration 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/_sysbuild/empty.conf'
Configuration saved to 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/zephyr/.config'
Kconfig header saved to 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/_sysbuild/autoconf.h'
--
***********************************
* Running CMake for nrf5340_audio *
***********************************
Loading Zephyr default modules (Zephyr base).
-- Application: C:/ncs/v2.9.0/nrf/applications/nrf5340_audio
-- CMake version: 3.21.0
-- Using NCS Toolchain 2.8.20241119.782234748775 for building. (C:/ncs/toolchains/b620d30767/cmake) -- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.9.0/zephyr/.cache -- Zephyr version: 3.7.99 (C:/ncs/v2.9.0/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: nrf5340_audio_dk, qualifiers: nrf5340/cpuapp -- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/b620d30767/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/ncs/v2.9.0/zephyr/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpuapp.dts -- Generated zephyr.dts: C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/nrf5340_audio/zephyr/zephyr.dts -- Generated devicetree_generated.h: C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/nrf5340_audio/zephyr/include/generated/zephyr/devicetree_generated.h -- Including generated dts.cmake file: C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/nrf5340_audio/zephyr/dts.cmake warning: Experimental symbol NRF5340_AUDIO is enabled. warning: Experimental symbol USB_DEVICE_AUDIO is enabled. Parsing C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/Kconfig Loaded configuration 'C:/ncs/v2.9.0/zephyr/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpuapp_defconfig' Merged configuration 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/prj.conf' Merged configuration 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/boards/nrf5340_audio_dk_nrf5340_cpuapp.conf' Merged configuration 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/nrf5340_audio/zephyr/misc/generated/extra_kconfig_options.conf' Merged configuration 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/nrf5340_audio/zephyr/.config.sysbuild' Configuration saved to 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/nrf5340_audio/zephyr/.config' Kconfig header saved to 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/nrf5340_audio/zephyr/include/generated/zephyr/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
-- libmetal version: 1.6.0 (C:/ncs/v2.9.0/nrf/applications/nrf5340_audio)
-- Build type:
-- Host: Windows/AMD64
-- Target: Generic/arm
-- Machine: arm
-- Looking for include file stdatomic.h
-- Looking for include file stdatomic.h - found
-- open-amp version: 1.6.1 (C:/ncs/v2.9.0/modules/lib/open-amp/open-amp)
-- Host: Windows/AMD64
-- Target: Generic/arm
-- Machine: arm
-- C_FLAGS : -Wall -Wextra
-- Looking for include file fcntl.h
-- Looking for include file fcntl.h - found
-- Setting build type to 'MinSizeRel' as none was specified.
CMake Warning at C:/ncs/v2.9.0/zephyr/CMakeLists.txt:2133 (message):
__ASSERT() statements are globally ENABLED
CMake Warning at C:/ncs/v2.9.0/zephyr/CMakeLists.txt:2164 (message):
The CMake build type was set to 'MinSizeRel', but the optimization flag was set to '-Og'.
This may be intentional and the warning can be turned off by setting the CMake variable 'NO_BUILD_TYPE_WARNING'
-- Configuring done
-- Generating done -- Build files have been written to: C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/nrf5340_audio -- ******************************* * Running CMake for ipc_radio * ******************************* Loading Zephyr default modules (Zephyr base). -- Application: C:/ncs/v2.9.0/nrf/applications/ipc_radio -- CMake version: 3.21.0 -- Using NCS Toolchain 2.8.20241119.782234748775 for building. (C:/ncs/toolchains/b620d30767/cmake) -- Found Python3: C:/ncs/toolchains/b620d30767/opt/bin/python.exe (found suitable version "3.12.4", minimum required is "3.8") found components: Interpreter -- Cache files will be written to: C:/ncs/v2.9.0/zephyr/.cache -- Zephyr version: 3.7.99 (C:/ncs/v2.9.0/zephyr) -- Found west (found suitable version "1.2.0", minimum required is "0.14.0") -- Board: nrf5340_audio_dk, qualifiers: nrf5340/cpunet -- Found host-tools: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found toolchain: zephyr 0.17.0 (C:/ncs/toolchains/b620d30767/opt/zephyr-sdk) -- Found Dtc: C:/ncs/toolchains/b620d30767/opt/bin/dtc.exe (found suitable version "1.4.7", minimum required is "1.4.6") -- Found BOARD.dts: C:/ncs/v2.9.0/zephyr/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpunet.dts -- Generated zephyr.dts: C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/ipc_radio/zephyr/zephyr.dts -- Generated devicetree_generated.h: C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/ipc_radio/zephyr/include/generated/zephyr/devicetree_generated.h -- Including generated dts.cmake file: C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/ipc_radio/zephyr/dts.cmake Parsing C:/ncs/v2.9.0/nrf/applications/ipc_radio/Kconfig Loaded configuration 'C:/ncs/v2.9.0/zephyr/boards/nordic/nrf5340_audio_dk/nrf5340_audio_dk_nrf5340_cpunet_defconfig' Merged configuration 'C:/ncs/v2.9.0/nrf/applications/ipc_radio/prj.conf' Merged configuration 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/ipc_radio/zephyr/.config.sysbuild' Configuration saved to 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/ipc_radio/zephyr/.config' Kconfig header saved to 'C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/ipc_radio/zephyr/include/generated/zephyr/autoconf.h' -- Found GnuLd: c:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi/bin/ld.bfd.exe (found version "2.38") -- The C compiler identification is GNU 12.2.0
-- The CXX compiler identification is GNU 12.2.0
-- The ASM compiler identification is GNU
-- Found assembler: C:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/bin/arm-zephyr-eabi-gcc.exe
-- Setting build type to 'MinSizeRel' as none was specified.
CMake Warning at C:/ncs/v2.9.0/zephyr/CMakeLists.txt:952 (message):
No SOURCES given to Zephyr library: drivers__console
Excluding target from build.
-- Configuring done
-- Generating done
-- Build files have been written to: C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/ipc_radio
-- Configuring done
-- Generating done
-- Build files have been written to: C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build
←[92m-- west build: building application
[9/20] Performing build step for 'nrf5340_audio'
[4/648] Generating include/generated/zephyr/version.h
-- Zephyr version: 3.7.99 (C:/ncs/v2.9.0/zephyr), build: v3.7.99-ncs2
[648/648] Linking C executable zephyr\zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 414100 B 1 MB 39.49%
RAM: 121116 B 448 KB 26.40%
IDT_LIST: 0 GB 32 KB 0.00%
Generating files from C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/nrf5340_audio/zephyr/zephyr.elf for board: nrf5340_audio_dk
[11/20] Performing build step for 'ipc_radio'
[4/131] Generating include/generated/zephyr/version.h
-- Zephyr version: 3.7.99 (C:/ncs/v2.9.0/zephyr), build: v3.7.99-ncs2
[13/131] Building C object CMakeFiles/app.dir/src/main.c.obj
FAILED: CMakeFiles/app.dir/src/main.c.obj
C:\ncs\toolchains\b620d30767\opt\zephyr-sdk\arm-zephyr-eabi\bin\arm-zephyr-eabi-gcc.exe -DKERNEL -DK_HEAP_MEM_POOL_SIZE=0 -DNRF5340_XXAA_NETWORK -DPICOLIBC_LONG_LONG_PRINTF_SCANF -DUSE_PARTITION_MANAGER=1 -D__LINUX_ERRNO_EXTENSIONS__ -D__PROGRAM_START -D__ZEPHYR__=1 -IC:/ncs/v2.9.0/nrf/applications/ipc_radio/./src -IC:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/ipc_radio/zephyr/include/generated/zephyr -IC:/ncs/v2.9.0/zephyr/include -IC:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/ipc_radio/zephyr/include/generated -IC:/ncs/v2.9.0/zephyr/soc/nordic -IC:/ncs/v2.9.0/zephyr/soc/nordic/nrf53/. -IC:/ncs/v2.9.0/zephyr/soc/nordic/common/. -IC:/ncs/v2.9.0/nrf/include -IC:/ncs/v2.9.0/nrf/tests/include -IC:/ncs/v2.9.0/modules/hal/cmsis/CMSIS/Core/Include -IC:/ncs/v2.9.0/zephyr/modules/cmsis/. -IC:/ncs/v2.9.0/modules/hal/nordic/nrfx -IC:/ncs/v2.9.0/modules/hal/nordic/nrfx/drivers/include -IC:/ncs/v2.9.0/modules/hal/nordic/nrfx/mdk -IC:/ncs/v2.9.0/zephyr/modules/hal_nordic/nrfx/. -isystem C:/ncs/v2.9.0/zephyr/lib/libc/common/include -Os -DNDEBUG -fno-strict-aliasing -Os -imacros C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/ipc_radio/zephyr/include/generated/zephyr/autoconf.h -fno-printf-return-value -fno-common -g -gdwarf-4 -fdiagnostics-color=always -mcpu=cortex-m33+nodsp -mthumb -mabi=aapcs -mfp16-format=ieee -mtp=soft --sysroot=C:/ncs/toolchains/b620d30767/opt/zephyr-sdk/arm-zephyr-eabi/arm-zephyr-eabi -imacros C:/ncs/v2.9.0/zephyr/include/zephyr/toolchain/zephyr_stdint.h -Wall -Wformat -Wformat-security -Wno-format-zero-length -Wdouble-promotion -Wno-pointer-sign -Wpointer-arith -Wexpansion-to-defined -Wno-unused-but-set-variable -Werror=implicit-int -fno-pic -fno-pie -fno-asynchronous-unwind-tables -ftls-model=local-exec -fno-reorder-functions --param=min-pagesize=0 -fno-defer-pop -fmacro-prefix-map=C:/ncs/v2.9.0/nrf/applications/ipc_radio=CMAKE_SOURCE_DIR -fmacro-prefix-map=C:/ncs/v2.9.0/zephyr=ZEPHYR_BASE -fmacro-prefix-map=C:/ncs/v2.9.0=WEST_TOPDIR -ffunction-sections -fdata-sections -specs=picolibc.specs -std=c99 -MD -MT CMakeFiles/app.dir/src/main.c.obj -MF CMakeFiles\app.dir\src\main.c.obj.d -o CMakeFiles/app.dir/src/main.c.obj -c C:/ncs/v2.9.0/nrf/applications/ipc_radio/src/main.c
C:/ncs/v2.9.0/nrf/applications/ipc_radio/src/main.c:15:2: error: #error "No radio serialization selected."
15 | #error "No radio serialization selected."
| ^~~~~
[22/131] Building C object zephyr/arch/arch/arm/core/cortex_m/CMakeFiles/arch__arm__core__cortex_m.dir/thread_abort.c.obj
ninja: build stopped: subcommand failed.
[15/20] Generating ../merged.hex
FAILED: modules/nrf/ipc_radio-prefix/src/ipc_radio-stamp/ipc_radio-build C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build/modules/nrf/ipc_radio-prefix/src/ipc_radio-stamp/ipc_radio-build
cmd.exe /C "cd /D C:\ncs\v2.9.0\nrf\applications\nrf5340_audio\build\ipc_radio && C:\ncs\toolchains\b620d30767\opt\bin\cmake.exe --build ."
ninja: build stopped: subcommand failed.
FATAL ERROR: command exited with status 1: 'C:\ncs\toolchains\b620d30767\opt\bin\cmake.EXE' --build C:/ncs/v2.9.0/nrf/applications/nrf5340_audio/build