SEGGER emStudio build project failure

[Samuel]

Hi,

After trying to work out why one of our nrf9160 DK:s cannot execute any AT commands using the at_client sample I tried redoing the getting started guide to make sure it is purely a problem with the board. After doing that SEGGER emStudio stopped working and when I try to build a project I get the following error:

This is the same for all samples and I can't figure out why, how can I fix this?

Kind regards 

Samuel

[Gurkan]

Hi Samuel,

Check out this thread, that has worked for me.

Thread Link

[Samuel]

Hi,

thanks for the tip Gurkan. I tried doing as the link you provided suggested:

git checkout c1939d963fe2c18013ffb8de0bd8f6fc1d91724d

west update

But unfortunately the same problem is still present.

[Samuel]

Hi JNair

I am not sure about how to fix you problem since I am pretty new here. But you could try doing as Gurkan suggested a few messages above by running "zephyr-env.cmd" in the zephyr folder to set you variables and try again. Since it seems to be some sort of variable problem from what I can tell.

/Samuel

[Gurkan]

JNair said:

/Documents/MyScripts/Nordic_NBIot/ncs/nrf/samples/nrf9160/spm/nrf9160_pca10090.overlay
arm-none-eabi-gcc.exe: error: CreateProcess: No such file or directory

Looks like it could not find gnu tool chain.
I'd suggest to simply your folder location, just do a clear installation from scratch and use;
for gnu toolchain -> c:\gnuarmemb
For nordic sdk -> c:\nordic\ncs.

[JNair]

Thanks Gurkan for the help. I will try doing that.

[JNair]

Thanks Samuel. Will try installing it from scratch and try again.

[JNair]

I had one more issue. If you could suggest something for that as well, it would be really helpful.

I had activated the iBasis sim which i got along with the DK then only i tried connecting on the link monitor. I am from Belgium and LTE-M is supported here. Even the modem is showing OFF, red colour.

After launching LTE link monitor, i did reset DK and zephyr OS booted but its showing some error 

[1;31m<err> net_if.net_if_init: There is no network interface to work with!

[Samuel]

When I run at_client I get this printed

It states that the AT host sample have started which I can't see in your output. Have you built and run your at_client sample or something else? I have LTE-M as well.

[JNair]

the problem is fixed and now i can run AT client on the DK. thanks