Error 133 (0x85): GATT ERROR on nRF52840

[Ali Rumane]

Hi,

I am running ble_app_blinky example on nRF5280 custom board, it is giving me Error 133 (0x85): GATT ERROR. Since I have nrf52DK, I tried same example with SD 132 on nrf52832 it works as expected.

I went through devzone and there are many questions with similar issues but  couldn't find a solution.

Could you please let me know what could be reason for the same?

https://devzone.nordicsemi.com/f/nordic-q-a/32590/error-133-0x85-gatt-error-with-htc-u11-life

https://devzone.nordicsemi.com/f/nordic-q-a/33313/android-gatt-133-error

SDK 15.2.0

SD 140

nRF52840

Keil

Tried on Honor 7X (Android 8.0.0), Redmi Note 4 (Android 7.0),

nRF Connect, 2019-04-24
Nordic_Blinky (XX:XX:XX:XX:XX:XX)
V 16:07:10.488 Connecting to XX:XX:XX:XX:XX:XX...
D 16:07:10.488 gatt = device.connectGatt(autoConnect = false, TRANSPORT_LE, preferred PHY = LE 1M)
D 16:07:19.253 [Callback] Connection state changed with status: 133 and new state: DISCONNECTED (0)
E 16:07:19.253 Error 133 (0x85): GATT ERROR
I 16:07:19.253 Disconnected
D 16:07:21.850 gatt.close()
D 16:07:21.854 wait(200)
V 16:07:22.056 Connecting to XX:XX:XX:XX:XX:XX...
D 16:07:22.057 gatt = device.connectGatt(autoConnect = false, TRANSPORT_LE, preferred PHY = LE 1M)
D 16:07:52.111 [Callback] Connection state changed with status: 133 and new state: DISCONNECTED (0)
E 16:07:52.111 Error 133 (0x85): GATT ERROR
I 16:07:52.111 Disconnected
D 16:07:54.117 gatt.close()
D 16:07:54.120 wait(200)
V 16:07:54.321 Connecting to XX:XX:XX:XX:XX:XX...
D 16:07:54.322 gatt = device.connectGatt(autoConnect = false, TRANSPORT_LE, preferred PHY = LE 1M)
D 16:08:09.849 [Callback] Connection state changed with status: 133 and new state: DISCONNECTED (0)
E 16:08:09.850 Error 133 (0x85): GATT ERROR
I 16:08:09.850 Disconnected
D 16:08:14.775 gatt.close()
D 16:08:14.779 wait(200)
V 16:08:14.982 Connecting to XX:XX:XX:XX:XX:XX...
D 16:08:14.982 gatt = device.connectGatt(autoConnect = false, TRANSPORT_LE, preferred PHY = LE 1M)
D 16:08:15.541 [Callback] Connection state changed with status: 133 and new state: DISCONNECTED (0)
E 16:08:15.541 Error 133 (0x85): GATT ERROR
I 16:08:15.541 Disconnected

00> <info> app: Template example started.
00> <info> app: Fast advertising.
00> <info> app: Connected.
00> <info> app: Fast advertising.
00> <info> app: Disconnected.

[Simonr]

Hi Ali

I see that the BL654 uses the nRF52840 chip, and not the nRF52832 which the example you referred to and the nRF52DK uses. Please make sure that you use PCA10056 and s140 when developing. The BL654 does not ship with the external RC oscillator, so you have to configure the chip to use the internal RC instead. You can configure it to use the internal RC by setting this define = 0:

// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
//==========================================================
#ifndef NRFX_CLOCK_ENABLED
#define NRFX_CLOCK_ENABLED 0
#endif
// <o> NRFX_CLOCK_CONFIG_LF_SRC  - LF Clock Source
 
// <0=> RC 
// <1=> XTAL 
// <2=> Synth 
// <131073=> External Low Swing 
// <196609=> External Full Swing 

Best regards,

Simon

[awneil]

Simonr said:

You can configure it to use the internal RC by setting this define = 0

Really?!

If that's true, then the documentation is misleading!

Surely, you want to keep that one enabled, but change NRFX_CLOCK_CONFIG_LF_SRC - as Ali Rumane says later...