Acceleration active and deactivate GPS

[Hoang]

Dear, 

Im trying to use the motion to activate the GPS and deactivate GPS:

    1. when it moves, GPS will be activated: Position-ON 

   2. when it stops, GPS will be activated again: Position-OFF

Currently, I used the sensor_trigger_set() to enable GPS when it detects the motion as in :https://github.com/NordicPlayground/fw-nrfconnect-nrf/tree/master/applications/asset_tracker

But, I dont know how to implement the step 2:  when it stops, GPS will be activated again: Position-OFF

Could you plz help me, thanks so much 

My HW: THINGY:91 

Modem FW: v1.1.1

ncs_1.2.0

BR, 

Hoang Ng

[Håkon Alseth]

Hi,

 

But, I dont know how to implement the step 2:  when it stops, GPS will be activated again: Position-OFF

Do you want to stop the GPS, or start it again? These two functions enable/disable the gps_controller library: https://github.com/NordicPlayground/fw-nrfconnect-nrf/blob/master/applications/asset_tracker/src/gps_controller/gps_controller.c#L125-L133

 

If you're using asset_tracker, as-is, you can also look at this function:

https://github.com/NordicPlayground/fw-nrfconnect-nrf/blob/master/applications/asset_tracker/src/main.c#L1221

 

Kind regards,

Håkon

[Hoang]

Håkon Alseth said:

Do you want to stop the GPS, or start it again? These two functions enable/disable the gps_controller

I want to start GPS again. For example, my thingy:91 is staying in my car, when the car is moving: start GPS and capture the start-Position, then stop GPS. When the car stops, start GPS again, and capture the stop-Position. During the moving time of the car, the THINGY:91 will sleep (to save the power), it just captures 2 positions: start and stop position. 

[Håkon Alseth]

Hi,

 

How do you define the "STOP" position? Is it to be detected based on a sensor event, or a timeout event? How to distinguish a stop at a traffic light vs. an actual stop?

One way of doing this can be: if you store the time since last registered movement, then start the GPS a given amount of time after the last movement was detected.

 

Kind regards,

Håkon

[Hoang]

Håkon Alseth said:

How do you define the "STOP" position? Is it to be detected based on a sensor event, or a timeout event? How to distinguish a stop at a traffic light vs. an actual stop?

I tried to use the timeout event, for example in 1mn, if no motion --> actual stop 

Håkon Alseth said:

One way of doing this can be: if you store the time since last registered movement, then start the GPS a given amount of time after the last movement was detected.

Ja,  I will try this one

Thanks 

BR

[Hoang]

Hi Håkon Alseth, 

I tried: 

1. accelerate trigger will : 

       1.1. Reset the timer: Timer 

       1.2. Start the timer: Timer

2. If the Timer > 5mn (no motion in 5mn) -->Stop --> enable GPS to find Stop-Position 

So, I need a function for the timer , and i found :

 https://devzone.nordicsemi.com/f/nordic-q-a/59950/timers-in-nrf9160-soc/244049#244049

And, i modified the timer_cb() to test:

void timer_cb(nrf_timer_event_t event_type, void * p_context) {
    printk("start GPS ..\n");
    gps_control_init(&application_work_q, gps_trigger_handler);
    printk("set_gps_enable----------\r");
    set_gps_enable(true);
}

i want i can start the GPS, but I got the error:

start GPS ..
 gps_control_init(struct k_work_q  gps_trigger_handler_t handler 

 device_get_binding ---------- 

 gps_trigger_set ---------- 

ASSERTION FAIL [!arch_is_in_isr()] @ C:/Demos/nordic/ncs_09032020/zephyr/kernel/include/ksched.h:269
	
[00:00:01.542,327] [1B][1;31m<err> os: r0/a1:  0x00000004  r1/a2:  0x0000010d  r2/a3:  0x00000001[1B][0m
[00:00:01.551,177] [1B][1;31m<err> os: r3/a4:  0x40008000 r12/ip:  0x00000000 r14/lr:  0x0002e7cb[1B][0m
[00:00:01.560,058] [1B][1;31m<err> os:  xpsr:  0x6100001f[1B][0m
[00:00:01.565,368] [1B][1;31m<err> os: s[ 0]:  0x00000000  s[ 1]:  0x00000000  s[ 2]:  0x00000000  s[ 3]:  0x00000000[1B][0m
[00:00:01.575,988] [1B][1;31m<err> os: s[ 4]:  0x00000000  s[ 5]:  0x00000000  s[ 6]:  0x00000000  s[ 7]:  0x00000000[1B][0m
[00:00:01.586,639] [1B][1;31m<err> os: s[ 8]:  0x00000000  s[ 9]:  0x00000000  s[10]:  0x00000000  s[11]:  0x00000000[1B][0m
[00:00:01.597,259] [1B][1;31m<err> os: s[12]:  0x00000000  s[13]:  0x00000002  s[14]:  0x00000000  s[15]:  0x00000000[1B][0m
[00:00:01.607,910] [1B][1;31m<err> os: fpscr:  0x4000f000[1B][0m
[00:00:01.613,220] [1B][1;31m<err> os: Faulting instruction address (r15/pc): 0x00033284[1B][0m
[00:00:01.621,307] [1B][1;31m<err> os: >>> ZEPHYR FATAL ERROR 4: Kernel panic on CPU 0[1B][0m
[00:00:01.629,180] [1B][1;31m<err> os: Fault during interrupt handling

How can I use the timer to start the GPS?

Do you have any suggestions?

Thanks so much 

[Håkon Alseth]

Hi,

 

You are asserting because a kernel function is called from interrupt context. Try setting a flag and handle it in main, or push the work to a workqueue instead.

Note that all socket operations will trigger an interrupt to communicate with the modem, so no socket functions should be called from an interrupt.

 

Kind regards,

Håkon