GLS/SEN/SPE/BI-09-C

[moon.kim]

Hi.

I am using the nRF52810 for Bluetooth SIG certification.

S112 6.0.0

SDK 15.0.0

I am testing using ICS of QDID 102861 and 49943, but a failure occurred in the GLS/SEN/SPE/BI-09-C items.

Please check the PTS log below:

Test case : GLS/SEN/SPE/BI-09-C started
- Connection setup successfully.
- Tester successfully initiated connection.
- Paring process is done. Access is granted.
- Waiting for encryption change request!
- Encryption change event received.
- Encryption is successfully done.
- LE Security procedures completed successfully.
- Discover Primary Service by Service UUID Request completed successfully.
- The IUT successfully returned the UUID for Glucose
- Discover All Characteristics of Service Request completed successfully.
- Discover All Characteristic Descriptors Request completed successfully.
- Discover All Characteristic Descriptors Request completed successfully.
- Discover All Characteristic Descriptors Request completed successfully.
- Connection is disconnected successfully.
- Connection setup successfully.
- Tester successfully initiated connection.
- Discover Primary Service by Service UUID Request completed successfully.
- The IUT successfully returned the UUID for Glucose
- Discover All Characteristics of Service Request completed successfully.
- Discover All Characteristic Descriptors Request completed successfully.
- Discover All Characteristic Descriptors Request completed successfully.
- Discover All Characteristic Descriptors Request completed successfully.
- Connection is using encryption, please disable encryption for this test case.
- Connection terminated successfully.
	 -Final Verdict: FAIL
GLS/SEN/SPE/BI-09-C finished

A popup appears to disable encryption.

How can I modify the program??

I use static passkey. 

[haakonsh]

What is that test case? Is it just a conformance test of the GLS profile?

It seems the test only works for unencrypted links, i suggest you turn off encryption.

[moon.kim]

Hi, haakonsh

Check this in the items below.

TSPC_GLS_2_22

TSPC_GLS_3_1

GLS/SEN/SPE/BI-09-C : RACP write without Authentication

I don't understand well about turning the encrytion off.

I tried the test by setting the Security parameter as follows:

But it also failed.

#define SEC_PARAM_BOND					1
#define SEC_PARAM_MITM					0											
#define SEC_PARAM_IO_CAPABILITIES		BLE_GAP_IO_CAPS_NONE						
#define SEC_PARAM_LESC					0											
#define SEC_PARAM_KEYPRESS				0											
#define SEC_PARAM_OOB					0											
#define SEC_PARAM_MIN_KEY_SIZE			7											
#define SEC_PARAM_MAX_KEY_SIZE			16	

And I tried changing the settings below but it also failed.

BLE_GAP_CONN_SEC_MODE_SET_OPEN(&SecMode);
Err_code = sd_ble_gap_device_name_set(&SecMode,
									(const uint8_t *)DEVICE_NAME,
									 sizeof(DEVICE_NAME));

What settings should I change to turn off encryption?

[moon.kim]

Hi.

I tested all the characetistic and attributes of GLS by changing them to BLE_GAP_CONN_SEC_MODE_SET_OPEN, but the test also failed.

A look at the Bluetooth SIG's GLS test suite is described below.

I know QDID 49943 has passed the GLS test. Can you check the related source code?

[haakonsh]

Do you still get the same error message? 

I'm going on vacation for a week, but I'll assign your case to another Tech Supporter.

BR,

Håkon HoldhusI

[moon.kim]

Yes..

The same failure message still appears.

I wish another technical supporter would let me know the good news.

gls.7z

I send the log files recorded in Profile Test Suite.
You could open it with the PTS program...

[Vidar Berg]

Hello,

The record access control point characteristic must be set with a security level equal or greater than "Just works". The test case will fail if it's set with open access (BLE_GAP_CONN_SEC_MODE_SET_OPEN).

But the problem according to the original log you posted seems to be that PTS is enabling encryption. Did you make sure to skip step 4 which was outlined in section 4.2.2 of the GLS test suite document?

Best regards,

Vidar

[moon.kim]

Hi

I solved this problem by not performing pm_conn_secure(m_conn_handle, false) in sec_req_timeout_handler.

It doesn't seem to be a test to change RACP permissions.