Add secured OTA in ble_app_template

[Muqarrab]

Hi,

I want to add a secured OTA(Button Less) in ble_peripheral\ble_app_template.

Is there any proper tutorial/document/example for this?

Thanks! 

[Vidar Berg]

Hi,

Please consider using our Buttonless DFU Template Application as a starting point. You can also find more documentation about the buttonless mechanism here: Buttonless Secure DFU Service

Best regards,

Vidar

[Muqarrab]

Hi,
I am trying to upload nRF5_SDK_17.0.0_9d13099\examples\ble_peripheral\ble_app_buttonless_dfu but getting the follwing error. Can you please check?
Thanks

[Vidar Berg]

Hi,

The app will not be able to set up the SVCI interface unless you have a bootloader present.

    // Initialize the async SVCI interface to bootloader before any interrupts are enabled.
    err_code = ble_dfu_buttonless_async_svci_init();
    APP_ERROR_CHECK(err_code);

Tip: disable NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED and enable NRF_LOG_BACKEND_RTT_ENABLED in sdk_config.h, then make sure you have selected the "debug" configuration in the drop down menu in the top left corner of SES. This will make it so that the error information is printed out to the debug terminal window next time you start a debug session.

[Muqarrab]

Vidar Berg said:

The app will not be able to set up the SVCI interface unless you have a bootloader present.

Vidar Berg said:

Tip: disable NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED and enable NRF_LOG_BACKEND_RTT_ENABLED in sdk_config.h, then make sure you have selected the "debug" configuration in the drop down menu in the top left corner of SES. This will make it so that the error information is printed out to the debug terminal window next time you start a debug session.

Here is the error logs.

[Muqarrab]

I have uploaded the examples\dfu\secure_bootloader\pca10056_s140_ble.

[Muqarrab]

I have reached at this point now can you please guide is there any example/testing OTA file to perform OTA and check?