Setting advertising transmission power

[Ridhi]

i have nrf52832 sdk vr 17.0.2. i want to set transmission power of advertising packet. pls assist

[Karl Ylvisaker]

Hello,

You can set this using the sd_ble_gap_tx_power_set function directly.
As mentioned in the function API Reference you will need to enable include_tx_power for it to be included in your advertising packet.

Best regards,
Karl

[Ridhi]

 */
static void advertising_init(){
    ret_code_t             err_code;
    ble_advertising_init_t init;

    memset(&init, 0, sizeof(init));

    init.advdata.name_type                = BLE_ADVDATA_FULL_NAME;
    init.advdata.include_appearance       = true;
    init.advdata.flags                    = BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE;
   
		init.srdata.uuids_more_available.uuid_cnt=sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]);
		init.srdata.uuids_more_available.p_uuids =m_adv_uuids;
    init.config.ble_adv_whitelist_enabled = false;
    init.config.ble_adv_fast_enabled      = true;
    init.config.ble_adv_fast_interval     = APP_ADV_INTERVAL;
    init.config.ble_adv_fast_timeout      = APP_ADV_DURATION;
    
    init.evt_handler = on_adv_evt;

    err_code = ble_advertising_init(&m_advertising, &init);
    APP_ERROR_CHECK(err_code);
    uint32_t err_code = sd_ble_gap_tx_power_set(BLE_GAP_TX_POWER_ROLE_ADV, m_advertising.adv_handle, 4); 
    APP_ERROR_CHECK(err_code);
    ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);
		
		
		
		
		
}

is it how shall it work?? i have added

  uint32_t err_code = sd_ble_gap_tx_power_set(BLE_GAP_TX_POWER_ROLE_ADV, m_advertising.adv_handle, 4);
APP_ERROR_CHECK(err_code);

pls chek

[Karl Ylvisaker]

As mentioned this depends on the advertising configuration and data payload.
Please check the Online Power Profiler for an estimate of how long an advertising will take.

Best regards,
Karl

[Ridhi]

i am asking about min time... like in specs 0.625ms is a value given does that mean atlest 0.625ms time is taken for ble to adv 

[Karl Ylvisaker]

I do not understand you question, could you please elaborate?

Are asking about the minimum time it takes to send an advertising packet? If so, like already mentioned, this depends on what type of advertising (connectable/scannable? non-connectable/non-scannable?) and the size of the advertising payload. The time it takes to send an advertising with different configurations can be visualized in the Online Power Profiler. If you have not already looked at it I urge you to give it a try.

Please elaborate thoroughly on your question if this is still not what you are asking about. Please do not use any abbreviations or shorthands.

Best regards,
Karl

[Ridhi]

hi Karl,

i want to know is that what is the formula to calculate the ble advertising event length. I saw in online power profiler but didint get how this event duration is calculated

[Karl Ylvisaker]

Each of those three blocks represents the advertising on a single channel, so there are three in total. As you can see from the graph, it takes 573 µs to complete the advertising on each channel, for a total of 2379 µs to complete the full advertising event.

Best regards,
Karl