We tested the USB performance on the v3.1.0-preview4 and main it looks like it got even worse.
All tests were done on the attached test project: TestProject
main (6855b38ca69d2a70d0a088d9964e606e9981cb14...
I have been trying to get MQTT+TLS to work on the nRF7002 DK and haven't been able to get the samples to connect to the MQTT Broker.
Is there a working MQTT TLS example...
Seeing the failure below and wondering a couple things:
How did the device get into this state?
How do I disable AP protection? The Kconfig GUI seems to indicate that...
Hello,
For our emission tests in an anechoic chamber we need to be sure that the BT antenna is up and running. Of course we cannot connect via BT from outside the chamber...
hi support team,
docs says we can program 54l15 external spi flash ,please refer to : https://docs.nordicsemi.com/bundle/nrfutil/page/nrfutil-device/guides/programming_external_memory...
Hi all,
I'm working on a Nordic-based system involving multiple nRF52-series chips exchanging high-rate sensor data over both radio and SPI links. The setup involves two...
Hello ,I wrote a program that allows to control the LIS2DE12 accelerometer but I am reviewing a fixed result which is always X = 72, Y = 33, Z = 32, I find out where the problem...
In my nRF52832 base-board, I don't have any leds and buttons.
I use Keil v5 and I used ble_app_uart_pca10040_s132.
I copied pca10040.h as custom_board.h and replaced BOARD_PCA10040...
I Cant clear the RTC2 after a Compare Match. First Compare is Triggered. After that no more Interrupt is generated. Code:
static const nrf_drv_rtc_t rtc = NRF_DRV_RTC_INSTANCE...
I debugged with pca10028, but J-Link can not recognize manufacturer.
If selected cortex-M0, it works but is very inconvenient.
How can I solve this problem?
Hello,
i am meeting problem to program the SoftDevice using an example project in Keil for nrf52832.
i have tested the development kit setup use Blinky Example . it is...
Hi,
We are using sdk12.3.0 sd130 v2 on nRF51822(32KRAM version). We want one central to connect to at least 3 peripherals. We are starting with ble_app_hrs example at the...
Configuration:
nRF5_SDK_13.0.0_04a0bfd
PCA10040
ARMGCC
Background:
I have created custom service based on ble_nus service. I have created 4 characteristics with notify...
I'm concerned about users writing too much or invalid NDEF data to the NFC function.
This could result in parse errors or buffer overflows leading to system crashes/malfunction...
Good Morning,
I need help for integrating a wifi card of this type or another that may suggest. With explanation of connection in the pinp Gpio of the thingy52 board, what...
Hello everyone,
I am looking to start developing something using nfc but I am unable to do so.
I am using SDK v12 and it has nfc examples as well like "record_url" or "adafruit...
Hi,
How to integrate both over-the-air and uart bootloader application for an device? We have a custom board with nrf51822 chipset, and we need to implement the firmware...
Hello,
I'm currently experimenting with the dual-bank bootloader in SDK 13.1. According to the documentation, if the new application can be activated, it is copied from...
Hello everyone,
I'm developing a new device using the nRF52832 but I have 2 questions before I send my PCB to manufacture, I hope you can help me out:
Is there any...
Hi,
Congratulations on releasing nRF Connect v2.0!
Unfortunately, I'm having trouble with adding apps behind corporate SSL proxy. Is there a workaround for this?
Please...
