It flashes with sucess
C:\Users\vasco>openocd -f interface/stlink.cfg -f target/nrf52.cfg -c "program \"C:/Users/vasco/OneDrive/Ambiente de Trabalho/zephyr.hex\" verify...
Hi Team,
We are developing on a custom board with an nRF54L15 (Raytac Module with NRF54L15_xxAA_ENGB) and are unable to provision a pre-generated secp256r1 private key into...
Hi, I want to run Bluetooth Mesh Light example on nrf54h20 chip.
At the beginning I prepared devboard with this tutorial: https://docs.nordicsemi.com/bundle/ncs-latest/page...
Hello,
I am trying to build a firmware for the nRF5340 on the Thingy91:x. The firmware should use the external flash for the secondary Image and is using the chained bootload...
SDK: nRF Connect SDK v3.0.2
DK: nRF54L15-DK
Sample: spi_flash
default:
mspi-max-frequency = < DT_FREQ_M ( 8 )>;
If I change it to 32, it will printf these...
Hello,
I'm looking for answers and some explanation for two main questions - is it possible to perform non-simultaneous multi-image FOTA over WiFi? Is it possible to support...
As shown in the figure, MCUboot has a boot_go_hook function. I'd like to define this function in my own project and compile it into MCUboot. Since I'm using single slot DFU...
Hello all
I am trying to better understand the sequence in which all the data is encoded in to the advdata structure. This includes device name, company identifier, manuf...
Hi,
I've noticed that the following s110 API work in my application, when called from the main context, but fail when called from an ISR context (button press interrupt...
I want to convert an integer to a char array and feel like this is something an nRF library may have already implemented. Nothing showed up after an initial search of itoa...
Hello,
I wish to create a mesh for my product and I have two options Zigbee and nordic SoC. My application involves very little data transfer and that too at very low rate...
Different examples for s110 use different methods to configure advertising, sd_ble_gap_adv_start() and ble_advertising_init(). What is the guidance for choosing between the...
Hello,
I'm looking to get the nRF24LU1+ dongle to work as a VCP. I had a code running 4 years ago on the dongle as a Mass Storage device but I was wondering if someone...
Hi guys,
I have to port the current library that is working at the arduino uno for arduino zero pro but when I change the board type I get the following errors:
__file__...
Hi
Here's what I would like to do: I have a bluetooth device with an nrf51822, with which I gather some sensor data, with a period of say 1 minute. I would like to store...
Hi,
If the bootloader is allocated 16 kB of flash, can it be upgraded Over-The-Air to a larger size bootloader at a later point, or does that require flashing the device...
I am a beginner and I am trying to generate a data ready event and after that reading the FIFO_Count but FIFO_Count gives me the value 1024 that is the maximum possible size...
Hello,
We are in interaction design in a school in France and we must create a connected object. We bought a BLUETOOTH SMART BEACON KIT (nRF51822) and we would know what...
I used nrf51822_narrow module DT26.
softdevice : s110
application: ble_app_hids_mouse
sdk: nrf51_sdk_v6_1_0
Now , we are able to move the cursor with the mouse of the...
Hi,
In the nRF51-ble-bcast-mesh example, it is mentioned that "handle_count" refers to "The maximum number of handle-value pairs available to the application. May not be...
