Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
I used to be able to see my development kit in nRFgo studio and flashed S110 onto the chip. Now all I see is: "No boards connected". I am still able to flash programs onto...
Hi i want to send a string using uart over bluetooth. For a try i compile ble_app_uart and flash it to my dk but i can not see the message on the terminal neither in Putty...
Hello everyone,
I am using nrf52832 module with SDK v14.2 and SD v5.0.0 for my development.
Recently, i started facing the below issue:
Once i try to pair the module...
Hi Great QA team:
Our client has made their product in MP stage but found out that some of the ICs with FDS Bug (Base on SDK 15.2):
REF: FDS - data corruption https:/...
Hello,
Quick question.. we are working on a board and running very low on GPIO pins. It would be helpful to remove the low-frequency (32k) XTAL, to recover those pins. The...
Dear,
I am testing with thing91
todo: read and send the temperature to my webserver in each 15mn
using: thingy91, LTE_M
sample1: in the fridge (4C)
sample2: in...
Dear community,
I am developing a firmware using SDK 16.0.0 which handles interruptions from an accelerometer and a timer.
I've built on top of APP_UART lib a set of functions...
Hello,
I tried to use use pc-ble-driver for Ublox NINA B3 EVK which has nRF524840 .
It failed with following error:
./heart_rate_monitor_v6 /dev/ttyACM0 Serial port...
Hi everyone,
I am using "nRF5 SDK for Thread and Zigbee 2.0.0" in my project , that includes the libraries of OpenThread (commit 704511c96e0d093139e4b80ef0739ed2d701afb1...
Hi there, currently I'am designing a circuit for nRF9160 inspired by Thingy:91. About Thingy's antenna tuning (Thingy:91 User Guide page 16+17) I have some basic noob questions...
hi guys,
I was just getting started with Nordic nRF52832, I want to find buffer containing bluetooth scanning data (Beacon) to process but see the examples but can't see...
Hi there,
I added the GPIOTE driver for the project ble_app_blinky_c under the SDK13, where if I enable GPIOTE my current consumption in sleep mode jumps from 3uA to 5mA...
Hi,
I am writing C/C++ programs running on open-embedded boards to talk through pc-ble-driver (v4.1.1) to bond (Security mode 1 level 4) with PCA10040 or PCA10056.
I found...
Hi,
Iam using the nRF52840 DK to make this as a bluetooth LE controller. By following this link https://infocenter.nordicsemi.com/topic/nwp_029/WP/nwp_029/building.html...
Hello -
We are using the nRF52840-DK with the 15.3.0 SDK on FreeRTOS. Our application is configured for tickless idle and based on the ble_app_hrs_freertos example. I...
