Hi,
We are currently evaluating the NRF9151 for asset tracking using the AT firmware on the NRF9151 evk and an external MCU for the application firmware, emulating the final...
Hello,
We’re Bachelor’s students developing a project to estimate the angle of arrival (AoA) using a BLE antenna array on the nRF52833. Our implementation builds on Zephyr...
Hello team, I am currently working on the distance measurement functionality using the development kit (nRF5340 and SDK: v2.9.0). At present, the distance measurement runs...
Hi,
Right now I'm looking down at the nrf52840 datasheet, because I would like to do a project with such MCU, but I got to the part of the integrated DCDC converters and...
Im working with:
-Windows Nordic Connect for Desktop App v5.20.
-Direct Test Mode v2.5.0
-nRF54L15 flashed with ncs v2.9.0 direct_test_mode example
There is currently...
Dear team, in my design I'm using MCUBOOT to perform FOTA DFU over BLE and I need some confirmation about the building process to be sure to do all the step in a properly...
Hi!
I'm migrating my development environment to arm-based Mac. I succeed to install nRF Connect for Desktop app for aarch64 architecture, but struggling to get Bluetooth...
Hello,
we need some advice to choose the right TX power. We still wonder if TX power +4dBm is the best choice or better use the default 0dBm.
Here is some background...
Hi,
We are working NRF52832, SDK15.3. It works properly in debug mode but when I build in Release mode it is not working.
From my understanding debug mode will have symbols...
i use the demo ble_app_uart ，and i want to close the uart when ble is "Disconnected"。
but it when it do app_uart_close(),the nrf52810 is RST。 i use the same code in nrf51822...
In the nRF52840 do the peripheral interrupts (e.g. UART ENDRX) set the event register in the ARM core? If so is __SEV(); __WFE(); the only way to clear this event?
Project Starting Point I have a Zigbee end device that until recently, did not include an MBR, Bootloader, or the OTA cluster. Prior to the implementation of the previously...
Apologies in case query is dumb or not conveyed properly or duplicate query( related topic responses did not resolve/clear up topic for me)
What are the changes required...
Hi,
I am using Nordic version of SES v4.42, I am not able to debug and conformed that this version is having an issue details given in link below
https://devzone.nordicsemi...
Hello, I am using nordic nRF51822 chip and mbed api. I am creating a custom GATT service .
In the service , I tried to make a characteristic on BROADCAST mode rather than...
Hello,
I am making a low-power beacon.
I am using NRf52832 module with external crystal. No extra device.
I use SDK 14.2.0, because it's much easier than 15.3 for making...
Hi,
Got some questions about receiving adv packet in Mesh Beaconing Example:
According to the description " The beaconing example also demonstrates the usage of the Packet...
Hi,
Good day! I hope everyone is doing well.
I have a weird problem measuring Li-ion battery pack voltage.
Problem: Tried to measure battery pack voltage 12.6V using...
We're struggling a bit with our NFC implementation. We were using the T2T library, using the examples, and it was working fine. However, we saw current drain at ~ 400uA, which...
Currently I am testing the coap_client and https_client sample application with nrf9160 based custom board. But the board is continously resetting while searching for the...
Hi there,
I was wondering how the motion pane is supposed to work in the bifravst app, it doesn't seem to be refreshing. The battery pane doesn't seem to be refreshing either...
Hello.
I'm reading the documentation of the radio peripheral of nRF52832 but I can't find any information about the S0 and S1 fields.
What are those fields? What do they...
