I have a nRF51822 device.
When the connection interval is 50ms.
The transmission distance can up to 50m+.
But, when the connection interval is 1000ms.
The transmission...
Hi,
I have a simple question. It is possible to use the ble-sniffer nrf51822 on Kali Linux? I found a guide to use it on linux but I don't know if it is the same for Kali...
I've modified Nordic's "Nordic_Keyboard" sample to work with my custom board, just simple modifications to use custom_board.h rather than the default PC10028 configuration...
Hi,
I use HID application with S110 v8.0 profil.
I use BLE HID Keyboard example.
I put datas from smartphone to BOOT KEYBOARD OUTPUT REPORT and I whant read them by...
Hi all,
I use nRF51822 module and my environment is Eclipse + GCC + SDK 10.0. I refer to the example in path <SDK_PATH>/examples/ble_peripheral/ble_app_template, then make...
I am using nrf sniffer for trouble shooting. But it always exit unexpectedly. Wireshark was still open but the DOS window got closed.
I am attaching the log.txt.
log...
Hi all,
I am using ble open mesh with pca10028 boards ble mesh is working fine.
I am developing a application that has to blink led in mesh( without any delay between...
Hello, I have just picked up nordic and I am running the app on Android Studio using windows, the source code I have received from GitHub so I can ticker with it. My question...
Hi everyone,
I am in the process of readying my firmware and hardware for CE certification.
The end functionality for this product is not yet finalized, but management...
I use nrf52832 board by fast advertising to connect the central(surface 4 Tablet).Then the board go to sleep.when I push the button the board use direct advertising to connect...
Hi Nordic expert:
I need using PyACI to let a nrf52832 board to send a genericOn client packet to other mesh devices those have genericOnOff server model.
My environment...
Hi friends:
I've followed "DFU quick start guide" and run DFU(from mesh-sdk-2.1.1) example done, the updating time is about 3000 seconds.
(My environment is only 2 devices...
I'm implementing my own DTM mode for the nRF52832 based on SDK14.2's DTM module (ble_dtm.c). My modified version of ble_dtm.c seems to work fine, but I don't completely understand...
Good afternoon,
I am able to write data using polling mode with the macro NRF_SERIAL_CONFIG_DEF(serial_config, NRF_SERIAL_MODE_POLLING, NULL, NULL, NULL, NULL). I am using...
Hi together!
Ist it possible to send a CR (Carriage Return) over the programmable UART Buttons?
When yes, what is the Syntax for?
For example, i need to send such a...
Hi
I used nrfutil.exe (v3.5.1 based on python v2.7.13) to create bootloader.zip file from SDK v15 - \dfu\secure_bootloader\pca10040_ble\ sample code.
CMD : nrfutil.exe...
It appears as if the LFCLK is not calibrated to 500PPM accuracy. I display the time in the system and every 60 seconds it falls 2-3 seconds later relative to the clock on...
nRF52832 / SDK V15.0.0 / nRF connect / DFU OTA Buttonless
Hello,
My device name is 21 chars but it is truncated and appears as 20 chars in nRF Connect "Discovery devices...
We are using an nrf51822 processor, running off of 2.7 volts from a switching power supply, powered with 12.4volts. The processor has simple gpio connections, and a battery...
Hi,
The structure nrfx_spim_xfer_desc_t contains both tx_length and rx_length fields.
Is there a situation where tx_length != rx_length ?
Thanks,
Daniel
I have a nicely working application that occasionally hangs. I have managed to trap a "hard fault" under the debugger (using VS with GCC). I have the system halted with the...
hello, Nordic developers!
I needs help develop rnf52840.
Goal
My goal is ble & 802.15.4 mutiprotocol, not using zboss network.
Actually, It is the same situation as...
