Hello,when i get connected to the phone,when i call err_code = ble_hts_measurement_send(&m_hts, &simulated_meas) and err_code = ble_bas_battery_level_update(&m_bas, battery_level...
I got the Dynastream N5 kit and have successfully used it with limited ANT work and was trying to get BLE working but can't get a driver for the USB dongle. On the 51422 product...
Hi All,
I am working in the sleep mode with system off and wake up with internal RC clock.
It function well when connected to EV board...
I see the "Emulated System...
I want to write PCA20006 nRF51822 Beacon Firmware to PCA10004 on nRF6330.
I understand need to modify GPIO.
PCA20006 firmware consist of 3 firmware, SoftDevice, application...
With version v2.0 of S332, I checked for a return of BLE_ERROR_NO_TX_PACKET when using the ble_nus_string_send function. I use this test in a routine which writes buffers...
I called these command:
nrfjprog -f NRF52 --eraseuicr
nrfjprog -f NRF52 --program app.hex --sectorerase
During the eraseuicr I see:
Erasing UICR flash area.
Applying...
Hi there,
for my Application, I want to listen for all BLE packets on a fixed channel.
No SoftDevice is used.
I receive all packets as long as BASE0/1 and PREFIX0/1 and...
now, i have a question: i have a buffer 100byte data to send, when i send data package via sd_ble_hvx() continus,delay 20ms after each send ,but it will lost some data , i...
HEllo,
I am facing and issue with undefined references for the linker. The compiler is able to compile, but I get linker errors like these
.../pca10040/s132/arm4...
Hello everyone, I recently use the nRF51822 with SD9 and S110, I found that the device name was define as: #define BLE_GAP_DEVNAME_MAX_LEN 31
is it means the max length of...
Hello!
We have built an app that transfers files from an app on Android to the device running an nRF52 with S132. On the device is an external flash using SPIFFS as a file...
Hi to everybody,
I am working with nrf52 and SDK11. In my project I am using freertos and an UARTE with this configuration:
9600bps
TX/RX (no CTS; no RTS)
HW...
Hi All,
We are interfacing Nordic nRF52832 with our Display using SPI interface. As per display, Data / Command bit needs to be set at the beginning of transfer. Using...
I am trying to understand the use of multiple channels in the timer. Looks like the use of the multiple channels is for PWM/ sequencing type applications. It is not intended...
I am using nrf51822 and having some questions,as follow:
1、the pin reset is common with the pin SWDIO(the debug IO pin).when I download into nrf51822 using JLINK（setting...
