Due to production requirements, I need to obtain the device's QR code. However, I found that the QR code can only be retrieved using the code snippet below after calling Nrf...
I am trying to create a custom sensor for CT1711 temperature sensor. I have created the sensor driver code and device tree binding, but it won't start (initialize) and the...
Hi,
Is it possible to make the MQTT connected device receive the Shadow config updates and AT Commands immediately? Based from our testing, the device only receives the...
Hi Nordic Support Team,
I'm currently experimenting with Channel Sounding using a couple of nRF54L15 boards.
I am trying to obtain raw I and Q samples so that I may analyze...
Hello,
currently i am configuring the networking stack on my project.
The goal is to use Matter's built-in Thread connection, to establish a Secure CoAP connection. I...
We use several Nordic chips in our BLE sensors. We bond to the devices from Android, connect to update configurations, then disconnect such that the device then advertises...
Hello,
I'm new to nRF51 and would like to understand if it is possible to output 5 independent PWM signals to 5 GPIO pins simultaneously on a nRF51?
Thank you.
Hi Nordic,
I am using PCA10031 nRF51422 dongle and trying to program ble-sniffer_nRF51822_1.0.1_1111_Sniffer.hex for sniffing. I have downloaded the ble-sniffer_win_1.0.1...
When initializing the S110 softdevice, I can choose between the different clock sources as defined by the nrf_clock_lfclksrc_t enum:
/**@brief Possible lfclk oscillator...
I have developed a custom board with a NRF51822AB on which there is no power switch. I want to power up and power down the device with a push button.
Power up : The user...
Hello,
Does anyone have a suggestion for a production programmer for the nRF24LE1 One Time Programmable version? I have been able to program the units with the nRFGo Studio...
Hello,
We want to support two mutually exclusive services, that is, while one is active, the other one will be hidden, once the gatt table is updated, we could send the...
I am using the ble sniffer application and a nrf52 development board. My plan is to generate a random TK every time the device is to be paired, and have that TK transmitted...
Hello,
Lately I tried the example proximity with S130. But I found it did not work as if it is with S110.
Particularly, I found the irk_match flag in the following code...
Hi,
I am using the sample code provided by Nordic in the software examples for BLE glucose peripheral mode.
Also i am using the development kit provided by InsightSIP...
I compiled SDK810\examples\dfu\bootloader\pca10028\dual_bank_ble_s110\arm5_no_packs without error and slapped it and the SoftDevice 8.0.0 into my erased target using nRFgo...
I'm trying to do background transmission of an advertising packet using the timeslot API. I'm basing my code on the multi-role-conn-observer-advertiser example. My question...
Hi all,
I'm using the PCA10028 and S130 based on SDK9.0。Now I have save the device name(such as "My device") in the flash,so the 51822 can read the device name and update...
I would like to log the adc value on the RTT Viewer.
uint16_t adc_result; This is the variable, which I would like to log.
So after the measuring I call:
SEGGER_RTT_WriteString...
