Good day,
I've developed a board with a MDBT50Q on it. I'm using the Reg0 DC/DC and LDO Mode Disabled reference circuit ( https://www.raytac.com/download/index.php?index_id...
Hi,
I have the issue that my Zigbee device reports the error "Production configuration is not present or invalid (status: -1)". I followed the guide from this( https://docs...
Hi,
I am using an nRF52840 as a Zigbee NCP. I have built the firmware myself using nRF Connect, and I am also running MCUBoot. Sometimes after some usage, the chip starts...
Hello everyone,
I am testing out I2C on the nRF54L15 for a custom PCB project.
I first tested a simple mpu6050 sensor on &i2c21 on pins P1.11 for SCL and P1.12 for SDA...
I have a bit of an unusual use case where the nPM1300 is quite ideal but need to use an external charger for the battery instead of the internal charger. The nPM1300 fuel...
Hello,
We are currently developing with the nRF9151 and would like to request more information regarding GNSS SNR testing.
We have reviewed the documented GNSS functionality...
Hello,
Is the nrf54 family's I2C peripheral compatible with I3C? I need to communicate with several I3C sensors on the same bus.
If yes, is the software support only...
Hey guys, I have a question.
Please tell me.
I use the BLE module implementation of the nrf51822.
Now, I try to use sample program "ble_app_hids_mouse" for s110.
I want...
Hi,
I have a application that receives the Epoch time from the Android Application and increments every second. and needs to store and increment the Epoch Time value even...
We just locking for your mesh protocol...
Can mesh example source communicate Ping_pong, Scaling_example, Template by using BLE_Gateway?
Please let me know...
I am using sniffer to monitor the BLE packets.
I noticed that when master is reading the list of the characteristics, sometime there are 2 handles involved, sometime there...
I'm setting up the nRF52 environment on Linux. I have previously used the pure-gcc setup with the nRF51 and that currently works, but since the nRF52 came with all the GCC...
In nutshell, I intend to achieve
Buttonless DFU over BLE on a custom
board with SDK v10.0.0 and Softdevice
v8.0.0 with bonding retained.
On this custom board...
Hi,
I am attempting to make a PCB for NRF51822 and I was wondering how I would upload a bootloader to the chip? I can't seem to find it. The device in the end will be using...
I checked several (not All) Keil nRF SDK 11.0 Ble_pheripheral examples and the S132 softdevice Hex File doesn't seem to be in the project any more.
The flash softdevice target...
Since the Intel Curie SoC integrates a nRF51822 circuit, it would be great to program it. Being that the canonical OS for Curie's (current) reference platform 'Genuino 101...
I ran watchdog with this code:
void wdt_init(void)
{
NRF_WDT->CONFIG = (WDT_CONFIG_HALT_Pause << WDT_CONFIG_HALT_Pos) | ( WDT_CONFIG_SLEEP_Run << WDT_CONFIG_SLEEP_Pos...
Hi, I'm trying to get pairing working. So far I have set the following in nrfgo studio:-
Device security: security required
Required level of security: Authenticated...
I am from a Chinese company which produce power supply, I plan to use your product and try to download the APP for my Android phone(Sumsung A8). However, I can't download...
Hi,
I would like to add DFU support to my product.
How can I protect from people producing/buying counterfeiter boards and flashing my software on these boards ?
Do...
Hi,
I implemented two services, now I have the following problem. Each service is working standalone, but when I put both together only the first initialized service works...
