Hi: The device shows successful reconnection, but the mobile end is not connected.
And the connection information displayed on the device is (public), which is actually...
I am trying to measure the 300mA system current.
I cut off the system lane and connected Vin, Vout.
And when in ampere mode, the system is not turning ON.
(When I replaced...
Hi Nordic,
I have a custom board using a Raytac MDBT53 module with nRF5340. The board is designed for 3.3 V / LDO mode, but during bring-up I likely flashed firmware/configuration...
Hello Nordic support,
I am using two nRF54L15 devices with NCS v3.0.1 and ESB DPL at 1 Mbps. Auto ACK is enabled, the payload is 252 bytes, and the retransmit count is 9...
# SoftDevice Controller assert during DTM receiver test at dead/marginal RF link (nRF52833) ## Summary On an nRF52833, running the nRF Connect SDK Direct Test Mode (DTM) 2...
A customer implemented a nRF52840 (QIAA package) and says the output power is about 10dB lower than expected. Having done multiple nRF52 designs with good results, I reviewed...
While configuring a scene, the blind device is not visible in the scene settings screen, so it is not possible to set or save the blind position as part of the scene.
Steps...
Hi,
I am using the sample ble glucose code provided in the SDK.
When i am trying to connect it over BLE interface through Master COntrol Panel or iPhone app it asks for...
I haven't updated my copies of the nRF tools, or mBed's nRF51 code for some time. I just did and now it seems my old method of flashing no longer works. I was doing something...
Hi all,
I've developed a firmware solution for one of my clients. I've compiled using Keil, testing it on a board which previously had SD110. Then I delivered .hex file...
I am using nrf51422 sdk v8.0 on pca10028 kit and softdevice s110. My DFU and custom made application works fine when i use clock SOFTDEVICE_HANDLER_APPSH_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM...
Hi . I try to use the Persistent Storage Interface. but i can't write.
static void example_cb_handler(pstorage_handle_t * handle,
uint8_t op_code,
uint32_t result,...
Hi,
I used the old nrfjprog like this:
nrfjprog --eraseall --dfu --programs s130_softdevice_whatever.hex --program my_firmware.hex
Which worked fine. I've now updated...
i'm trying to blink led using timer, but nothing blink. I dont see the error in my code
#define APP_TIMER_PRESCALER 0 /**< Value of the RTC1 PRESCALER register. */
#define...
I've got a test app on my nRF51 DK that calls sd_ble_gatts_hvx as fast as possible to test maximum data rate for the Notify of a characteristic. This all works great. The...
Hi, I'm trying to get the new Nordic desktop tool working, but having some beginner's problems getting it to work on OS X 10.10 here:
Select Com Port button lists available...
How can i prohibit connect for not bonded device's?( not bond - not connect)...I am implemented the prohibit connection under the android phone, PC, iOS in Bluetooth connection...
Hi,
Just received my nrf51 DK board today and was trying to load the blinky example from my Mac (El Capitan ). It did not seem to work.
I first configures the compiler...
I'm trying to port SDK 9 serialization library to Qt. My starting point is ble_app_multilink_central_s120_uart_pca10028 project in Keil.
All nrf projects uses softdevice_handler...
I am starting my development work with Nordic Semiconductor nRF51822 Device and already purchased the Development kit. What i wanted to ask is do i need to purchase KEIL MDK...
