I am trying to measure the 300mA system current.
I cut off the system lane and connected Vin, Vout.
And when in ampere mode, the system is not turning ON.
(When I replaced...
Hi Nordic,
I have a custom board using a Raytac MDBT53 module with nRF5340. The board is designed for 3.3 V / LDO mode, but during bring-up I likely flashed firmware/configuration...
Hello Nordic support,
I am using two nRF54L15 devices with NCS v3.0.1 and ESB DPL at 1 Mbps. Auto ACK is enabled, the payload is 252 bytes, and the retransmit count is 9...
# SoftDevice Controller assert during DTM receiver test at dead/marginal RF link (nRF52833) ## Summary On an nRF52833, running the nRF Connect SDK Direct Test Mode (DTM) 2...
A customer implemented a nRF52840 (QIAA package) and says the output power is about 10dB lower than expected. Having done multiple nRF52 designs with good results, I reviewed...
While configuring a scene, the blind device is not visible in the scene settings screen, so it is not possible to set or save the blind position as part of the scene.
Steps...
Hello,
Does anyone have a suggestion for a production programmer for the nRF24LE1 One Time Programmable version? I have been able to program the units with the nRFGo Studio...
Hello,
We want to support two mutually exclusive services, that is, while one is active, the other one will be hidden, once the gatt table is updated, we could send the...
I am using the ble sniffer application and a nrf52 development board. My plan is to generate a random TK every time the device is to be paired, and have that TK transmitted...
Hello,
Lately I tried the example proximity with S130. But I found it did not work as if it is with S110.
Particularly, I found the irk_match flag in the following code...
Hi,
I am using the sample code provided by Nordic in the software examples for BLE glucose peripheral mode.
Also i am using the development kit provided by InsightSIP...
I compiled SDK810\examples\dfu\bootloader\pca10028\dual_bank_ble_s110\arm5_no_packs without error and slapped it and the SoftDevice 8.0.0 into my erased target using nRFgo...
I'm trying to do background transmission of an advertising packet using the timeslot API. I'm basing my code on the multi-role-conn-observer-advertiser example. My question...
Hi all,
I'm using the PCA10028 and S130 based on SDK9.0。Now I have save the device name(such as "My device") in the flash,so the 51822 can read the device name and update...
I would like to log the adc value on the RTT Viewer.
uint16_t adc_result; This is the variable, which I would like to log.
So after the measuring I call:
SEGGER_RTT_WriteString...
I did proper connection of lcd to nordic board. and did proper contrast setting.
But not able to display anything on lcd.
i am using JHD162A 16x2 lcd.
www.brodie...
Hi guys what's the latest revision of "nRF51822 Bluetooth Smart Beacon Kits"? that's the beacon with the battery, the revision is written on the envelope.
I thought it...
Hello everyone,
The more I learn, the more I learn how much more I have to learn.
I am pretty new to embedded systems development. I am tasked with developing an nRF52...
