Due to production requirements, I need to obtain the device's QR code. However, I found that the QR code can only be retrieved using the code snippet below after calling Nrf...
I am trying to create a custom sensor for CT1711 temperature sensor. I have created the sensor driver code and device tree binding, but it won't start (initialize) and the...
Hi,
Is it possible to make the MQTT connected device receive the Shadow config updates and AT Commands immediately? Based from our testing, the device only receives the...
Hi Nordic Support Team,
I'm currently experimenting with Channel Sounding using a couple of nRF54L15 boards.
I am trying to obtain raw I and Q samples so that I may analyze...
Hello,
currently i am configuring the networking stack on my project.
The goal is to use Matter's built-in Thread connection, to establish a Secure CoAP connection. I...
We use several Nordic chips in our BLE sensors. We bond to the devices from Android, connect to update configurations, then disconnect such that the device then advertises...
I'm exploring the possibility of using an nRF51 for a simple device which must take data samples on a fixed clock and push them to a remote client. The issue I'm investigating...
Even though the documentation suggests that there are 3 RTCs (RTC0, RTC1 and RTC2) and the file nrf52.h has a declaration for the RTC2 peripleral, I am not able to use it...
Hello,
I need a bigger bootloader so if i modify ld file line from
FLASH (rx) : ORIGIN = 0x7A000, LENGTH = 0x4000
to
FLASH (rx) : ORIGIN = 0x00077000, LENGTH = 0x8000...
link text from this post i am generating interrupt using button 3. when i push my button,interrupt generates,LED turn on. but after turning on LED, i want to clear interrupt...
I am using SDK 9 on an nRF51 device with the S110 SoftDevice. I am aware of issues using the the PWM library from SDK 9. I need to use the PWM functionality but would like...
Hi,
i tried to modify app_pwm to add an additional timer, since i'm out of timers.
so at the end of app_pwm_init i added
nrf_drv_timer_compare(p_instance->p_timer...
Does NFC has something like an unique adress?
Because the nfc examples in the sdk detect all nfc devices. But I would like to detect only predefined devices.
Or is there...
I seem to be getting correlation on addresses
I running the radio transmitter and receiver examples provided in the nRF5 v11 SDK. However, I am observing still some unexpected...
Hi when I try to run the HRM collector the scan start fails with error code 12289
I am using visual studio and C++
What am I missing? I downloaded "connectivity_115k2_with_s130_1...
Hey All -
My team is new to Bluetooth development and so this may be a naïve question. Pardon us for this, if so.
We are trying to create an Android App that would scan...
Hi,
There is a difference of one digit in BT address and DEVICEADDR. Could anybody explain this? I know in the last byte we have to add C0, but what about the frst byte?...
I added CCCD descriptor to Battery Level characteristic in the proximity_setup.xml.
The nRFSTudio throws an error 0x01 while generating services.h.
Kindly help me generate...
8.0, multilink example, peripheral, s110 softdevice.
I modified the button_event_handler() function in main.c into this:
static void button_event_handler(bsp_event_t...
Hi....
I have a problem when i use dfu_dual_bank_ble_s130_pca10028 in sdk v11 on my board. cpu is nrf51822QFAA.it seems reset all the time. using keil debug, it's wrong on...
