I purchased a SIM data from ILIAD and I am trying to connect to network, but the AT command AT+CEREG? : +CEREG: 0,4 instead of 0,5 as I expect.
The lte_lc_connect_async...
In order to reduce power consumption , I configured the RX pin of the serial port with an interrupt , and when the device was asleep , it was woken up by an interrupt , and...
Hi I am using an nRF54L15 with an external watch crystal. I have notice that depending on the manufacturer of the crystal I have to use a different internal load capacitor...
i've noticed that the pc-nrfconnect-ppk is written in typescript (with a lot of .tsx files for visual elements)....
my understanding is that at the lowest-level the power...
I am using the `mcumgr` subsys to enable the DFU (Device Firmware Update) capabilities in a custom device that also features a custom (non mcuboot) bootloader. In order to...
Hi !
I have a peripheral that can connect to other nRF52's or a smart phone such as iPhone or android. Is there an easy way to detect a smart phone?
The best I can think...
Is it possible to see LOG_INF() or LOG_ERR() messages from custom board software when the custom board is connected to a nRF52840DK through connector P20? The custom board...
Hi,
I have a mesh device (door sensor) with cell battery powered.
When triggered, the device power on, do mesh stack init and start mesh stack, publish a mesh message...
Hello all, is it possible to wake-up the device from deep sleep using cap sense.
How reliable is the ADC cap sense, Im little confused as some people say CapSense is not...
There is an "error" in the Mesh 4.00 friend.c:friendship_alloc(..) function, when allocating a new friend with PollTimeout greater than 2147 seconds. The LPN allows you to...
Hi,
Working with Uart + DMA on the nrf91 board, we see two issues:
1. With baudrate of 115200, we get an overrun error after getting ~6KB of data.
2. Sometimes we do...
I am trying to develop a simple uart driver based on the nrfx_uarte driver but I get compiling errors (see below).
All I have is a simple uartOpen() function for now...
Hi,
Greetings!
I am trying to develop a device called as " Gateway ", which can receive SIGmesh messages and update/send those messages to cloud server and vice-versa...
Hi Nordic Community,
I have two nrf52840 feather boards, and I configured one of them as central scanner with the central_scanner example. It works well and was able to...
Hello all,
I struggle to program nrf52 on Eclipse, and it works fine with Keil. Let me explain :
With Keil :
-I first flash softdevice 5.0 manually with JFlash Lite...
software: nrf5_SDK_for_Mesh_v4.0.0_src
hardware:nrf52382QFAA
I just build the sdk,and then download s132_nrf52_7.0.1_softdevice.hex and light_switch_provisioner_nrf52832_xxAA_s132_7...
Moved to a new machine and now can't debug. I suppose I've overlooked something. First, Segger doesn't recognize that it has just compiled the app and asks to recompile. Then...
I've been looking at ways of implementing Web Bluetooth to connect to a Thingy52 using Bluetooth Low Energy.
https://github.com/NordicPlayground/Nordic-Thingy52-Thingyjs...
Hello; I have been working with nrf52840 dk's for the past couple months, and came across a few questions.
First off, my temporary goal using nrf52840 is to send a timestamp...
Hi
I am planning to use the nRF52833 for the AoA direction finding application. On that I had two questions.
1. Currently I have two nRF52833 DKs for transmission and...
Hi all,
I am developing on nRF Mesh SDK 4.0.0 with nRF52833 DK (PCA10100).
To save/restore persistent model state to flash, I added the code using mesh_config_entry_get...
