I have a custom made board that has an EFM32WG360F256 communicating to an nRF8001, verified that the ACI protocol works with repeated echos, however when I run the efm_ble_my_project_template...
Hi,
I have 3 nRF51 DK pca10028 v1.1.0
I compiled and run power profiling example and after that I cannot flash or connect to the devices (tested in all three of them)...
Hi Guys,
Thanks for your precious time and insight. Let me try to explain what we did,
We have developed a custom board
After assembling the board, we do a bare board...
Hello all, this tutorial goes to a fellow named Emil who helped me with this project.
Number 1_ Make sure you set up the terminal viewer For debugging with real.You need...
Seeing recent response to my original question on multiple chip selects, I've opted to share a modification to spi_master that I've implemented in part to make handling some...
What is the official status of the Softdevice Serialization for S130 in SDK 9? I could see an older answer on how that was removed in SDK 8 but since almost half year has...
Hi
The documentation for the new feature in S110 v8 to change the gatt table size says that to change it the linker configuration needs changing .
This means it is a...
Hi everyone,
Id like to know if anyone has tried to implement NFC Blocker Tag on NRF52480 or any similar nRF5 chip using their SDK. In general the purpose is to block a...
Hello! Is it possible to select to which interrupt types WFI (wake up from sleep mode) reacts?
I have a system with nRF51 where RTC clock initiates temperature measurements...
Hi,
The project "Thingy Mesh Provisioning Demo v0.7" which is available here on GitHub is for " Nordic nRF5 SDK for Mesh v3.2.0 "
Question: Is this project only supported...
Hi,
On our board, we have a nRF5340 + nRF9160 that turn on as soon as power is provided to the board.
We would like to reduce the inrush current drawn by these components...
Hi all,
I am working on CAN driver for the MCP25625 device, which communicates to the nrf9160 via SPI. I am following the SPI example https://github.com/Rallare/fw-nrfconnect...
Hi，
in the timeout_handler of app_timer_create, invoking function nrf_esb_write_payload(&tx_payload)，The timeout_handler function won't come in again，why? timer cancel?
Dear all,
I am using NRF52832 for a mesh application. I utilize the light switch example for the project.
Description of my application:
1. We have 6 devices. They...
I am trying to integrate LPS22hb sensor n nrf52832. I am starting with twi_master_using_nrf_twi_mngr example(sdk15a->compents->drivers_ext->lps22hb)
I have added lps22hb...
Hello,
I have a device that samples data from a bunch of sensors every n hours, and that when in IDLE must consume around 100uA. To achieve this, I'm using a counter (that...
Hi,
I connected MCUBoot and FOTA to my project. I checked that the download is working, but not stable. I saw in the documentation that you can enable the continuation of...
Hello I need a falling edge response via GPIOTE. The settings I use for sdk 16 to sdk 14.2.0 do not work. For sdk 16 I use the functions nrfx_gpiote _..., for sdk 14.2.0 nrf_drv_gpiote_...
I observed a peak of 334 ua during system-on low-power mode during idle time which is periodic around 4 sec. I am using ble with RC clock option.
1.is it waking for calibration...
Previously, I learned that BLE is capable of 1:1, 1:N, and N:N communication, but I didn't get the exact information. Can I get some information? How do you do it, what's...
